Backbeat FIT ® User Guide
Contents 3 Welcome 4 What's in the box* Get Paired 5 6 Headset overview Take control 7 Power on or off 7 Play or pause music 7 Skip to next track 7 Play previous track 7 Volume 7 Mute 7 Use voice commands 7 Answer or end a call 7 Decline a call 7 Pairing mode 7 Charge Fit 8 9 10 Armband/storage 11 Check battery level DeepSleep Mode Stay connected 12 13 Backbeat FIT Updater app Specifications 14 15 2
Welcome Congratulations on purchasing your new Plantronics product. This guide contains instructions for setting up and using your Plantronics Backbeat® FIT. Please refer to the safety instructions for important product safety information prior to installation or use of the product.
What's in the box* Headphones Armband USB charge cable NOTE *Contents may vary by product.
Get Paired The first time you power on your headphones, they begin the pairing process. 1 2 Power on the headphones. The indicator and blue to indicate the pairing process light located on the right headphone, flashes red Activate Bluetooth® on your phone and set it to search for new devices. • iPhone Settings > General > Bluetooth > On* • Android™ Settings > Bluetooth: On > Scan for devices* *Menus may vary by device. 3 Select “PLT_BBFIT.
Headset overview Power button Headset indicator light Call button Charge port Volume button: Increases or decreases volume Audio button: Play or pause music, track forward or track back 6
Take control Power on or off Play or pause music Skip to next track Play previous track Press the Power Tap the Audio button until you hear “power on"/"power off." button. Press the Audio button twice. Press the Audio button until you hear the confirmation tone to restart the current track. Press the button twice (each press until the confirmation tone sounds) to go to the previous track. Volume To increase the volume, tap the Volume button. To decrease the volume, press and hold the Volume button.
Charge Your new headphones have enough power to pair and listen to audio for a while. The door covering the charging port is located on the right headphone. Open it with your fingernail. It takes up to 2 hours to fully charge the headphones. While charging, the indicator light is red and turns blue once charging is complete.
Fit 1 For the best sound performance and a secure comfortable fit, drape around the back of your head. 2 Rotate the eartip between a plus and minus 20° range to achieve an optimal fit and sound experience.
Armband/storage Pouch to store headphones. Turn inside out to reverse into an armband to hold your phone during a workout. An extra pocket resides inside to hold smaller phones or music devices.
Check battery level To check the battery level tap the Power button while your headphones are powered on. Your headphones will announce battery status.
DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone for more than 10 minutes, your headset will conserve its battery power by entering into a DeepSleep® mode. Once back in range with your phone, press the Power button to exit DeepSleep mode. If your phone is also ringing, tap the Call button again to answer your call.
Stay connected Bluetooth has a working “range” of up to 33 feet between the phone and the headphones before audio degrades and the connection is lost. Your headphones try to reconnect after a lost Bluetooth connection. If they can’t, tap any button once or manually reconnect via the phone’s Bluetooth device menu.
Backbeat FIT Updater app Update the firmware for your Backbeat FIT over your Bluetooth connection using the Backbeat FIT Updater mobile application. The Updater app is available for both iOS and Android and can be downloaded from the Apple App Store or GooglePlay respectfully. 1 Make sure that your headphones are paired and connected to your phone. 2 Tap the "Update Firmware" button on the homescreen of the app. 3 Keep your headphones and phone within close range of each other during the update.
Specifications Talk/Listening time Up to 8 hours listen/6 hours talk* Standby time Up to 14 days* DeepSleep mode Provides up to 180 days* Operating distance (range) Up to 33 feet from phone or tablet Up to 33 feet from phone or tablet Headphones weight 24 grams Audio HQ custom SBC codec,13mm neodymium speakers, Frequency response 50-20,000 Hz, Total Harmonic Distortion <3%, sensitivity 105 dBspl/mW @ 1 kHz Noise reduction Digital Signal Processing (DSP) : • Full duplex echo cancellation • Real
NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. Patents US 5,712,453; Patents pending 202221-06 (07.
