Operation Manual

Your new earbuds have enough power to pair and listen to music for a while. To access the
charging port, insert your fingernail into the groove on top of the right earbud and pull down.
It takes up to 2.5 hours to fully charge the earbuds. While charging, the LED blinks red and turns
blue once charging is complete.
Check the battery status by tapping either of the Volume buttons when your earbuds are not
playing music or on a call. Your earbuds announce battery status by the hour and the LED
flashes
blue. When there is less than 1 hour remaining battery time, your earbuds announce the "battery
low" status and the LED flashes red.
If you leave your earbuds powered on but out of range of your paired phone for more than 10
minutes, they will conserve battery power by entering into a DeepSleep mode.
Once back in range with your phone, press the center button to exit DeepSleep mode. If your
phone is also ringing, tap the center button again to answer your call.
Charge
Charge
Check battery status
DeepSleep Mode
7