Operation Manual

ANC

Slide the switch to power on or off.

Slide the switch to activate or deactivate ANC to block out unwanted noise.

Tap the Play/pause button on the left ear cup to play or pause music.

Rotate the volume wheel forward (+) or backward (–) to control the volume.

Rotate the track wheel forward or backward to control the track selection.

Hear your surroundings by tapping the Mic button when not on a call.

If your smartphone has a voice-enabled assistant, press the call button for 3 seconds and wait

for phone prompt.

Tap the Call button on the right ear cup.

Press and hold the Call button for 2 seconds.

While on an active call, choose:

• Tap the Mic

button

• Take off/put on your headset while on an active call (requires active smart sensors)

Double-tap the Call button .

With your headphones powered on, press and hold the Call button until you hear "pairing" and

the LEDs flash red and blue.

Please read the safety guide for important safety, charging, battery and regulatory information

before using your new headset.

Headphone overview

Power on/off

Active Noise Canceling

Play/pause music

Volume

Track selection

OpenMic

Voice dial (phone feature)

Answer or end a call

Decline a call

Mute/unmute

Call back last call

Pairing mode

Be safe