Madone/Madone-M User Guide
Contents Overview 3 Charge stand 3 Headset 3 USB Bluetooth adapter 4 Connect and pair 5 Connect to PC 5 Pair your headset 5 Fit and charge 6 Right or left 6 Charge your headset 6 Load software 7 Customize your headset 7 The Basics 8 Make/Take/End Calls 8 Mute/unmute 8 Volume 8 Play or pause music 8 Track selection 8 Use sensors 8 ANC 9 More Features 10 DeepSleep Mode 10 Pair multiple devices 10 What's in the box Support 11 12 2
Overview Charge stand Headset ([ ]) ANC Volume up/down Track backward Play/pause music Track forward ANC Active noise cancelling Charge port Active call = mute/unmute, call waiting (softphone only).
USB Bluetooth adapter USB LEDs Red and blue flashes Solid Blue Blue flashes Solid red Purple flashes What they mean Pairing Pairing successful; Connected On a call Mute active Streaming music/media from computer 4
Connect and pair Connect to PC Pair your headset Your Bluetooth USB adapter comes pre-paired to your headset. 1 Insert the Bluetooth USB adapter into your laptop or PC (not docking station). 2 Headset call control Some softphones require downloading Plantronics Hub for Windows and Mac at plantronics.com/software for headset button functionality. NOTE Plantronics Hub software allows you to customize your headset's behavior through advanced settings and options.
Fit and charge Right or left To position the microphone on the right or left side, rotate the microphone boom up and over. Adjust the boom so it points to the corner of your mouth. TIP Your headset is smart enough to know what side you are wearing it on and all headset controls including L/R audio channels will switch with your boom side preference. Charge your headset Charge your headset with the charge stand or the micro USB cable.
Load software Some softphones require downloading Plantronics Hub for Windows and Mac for headset button functionality. Load Plantronics Hub for Windows and Mac by visiting plantronics.com/software. Customize your headset Manage your headset settings by downloading Plantronics Hub for Windows and Mac on your computer or Plantronics Hub for iOS and Android on your phone by visiting plantronics.com/software.
The Basics ([ ]) ANC Make/Take/End Calls Answer or end a call Tap the Call button. Answer a second call First, tap the Call button call. to end current call, then tap the Call button again to answer new Call back last call (smartphone) To dial your last number you dialed, double-tap the Call button. Voice dial (smartphone) If your smartphone has a voice-enabled assistant, press and hold the Call button for 3 seconds and wait for the phone prompt.
Use sensors Smart sensors respond when you put on or take off your headphones. With active sensors putting on the headset will: taking off the headset will: Call answer the call mute the headset Music/media resume music/media (if playing previous to taking off) pause music/media (if playing) Mute unmute if on an active call mute if on an active call Disable sensors To disable the sensors, hold both the Mute and Call buttons for more than 6 seconds until the LED flashes purple then red.
More Features DeepSleep Mode If you leave your headphones powered on but out of range of your paired phone for more than 7 days, your headset conserves its battery power by entering into DeepSleep mode. Once back in range with your phone, press the Call control Pair multiple devices button to exit DeepSleep mode. Your headset can pair with up to 8 devices but only maintain 2 connections simultaneousl; this includes the Bluetooth USB adapter.
What's in the box Headset Base Bluetooth USB Adapter Carrying case Micro USB cable Wall charger* NOTE * Accessory sold separately 11
FCC statement ·This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ·These limits are designed to provide reasonable protection against harmful interference in a residential installation.
NOTE: THE GRANTEE IS NOT RESPONSIBLE FOR ANY CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. IC Radiation Exposure Statement for Canada This device complies with Industry Canada licence-exempt RSS standard(s).
Support NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2014 Plantronics, Inc. Plantronics and Simply Smarter Communications are trademarks of Plantronics, Inc., registered in the US and other countries. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license.