User Manual

Earpiece Controls

Turn on the

earpiece

Press and hold the call control button for 2 seconds until

the indicator glows white. If earpiece ﬂashes red 3 times

when you turn on the earpiece then the battery is very low

and should be recharged.

NOTE When your earpiece is in standby mode, the indicator

is off. To conﬁrm that your earpiece is on, press any button.

You should see a white light ﬂash.

Turn off the

earpiece

Press and hold the call control button for 4 seconds until

the indicator glows red. When power is off, indicator

stays off.

NOTE If you’re wearing the earpiece, you hear ascending

tones when the power turns on and descending tones when

the power turns off.

Answer or

reject a call

When your earpiece rings, tap the power button once;

you should hear 1 low tone.

To reject a call and send the caller to voice mail, press the

call control button for 1 second.

NOTE Your phone may ring before your earpiece rings.

Wait until you hear the ring in your earpiece to press the call

control button and answer the call.

End a call While on a call, tap the call control button.

Make a call When the earpiece is paired to your phone and in range,

enter phone number on your phone and press send. The

call automatically transfers to your earpiece.

Transfer a

call between

earpiece and

phone

While on a call, press and hold the call control button for

2 seconds. You will hear a single low tone followed by a

double low tone. The call will then be transferred to the

phone.

DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed.