User Manual

10
Earpiece Controls
Turning the
multipoint
feature on
To prolong battery life, the multipoint feature is turned off by
default. To turn on this feature, see “Turning the Multipoint
Feature On and Off” on page 13.
Turn on
the online
indicator
While the earpiece is powered on, press and hold the volume
button for 4 seconds. White light will brighten over 2 seconds.
Repeat action to deactivate online indicators. White light will
dim over 2 seconds.You will hear a single low tone.
Adjust the
volume
During an active call, tap the volume button.
There are 3 volume settings. Each tap will increase the volume
until maximum is reached and you hear two low tones. Tapping
again will drop volume to minimum setting and subsequent
taps will increase volume until maximum is again reached.
Enabling or
disabling
mute
Enable mute: Press and hold the volume button for 1 second
until you hear a low/high tone and a voice saying “Mute on” (in
English). The low/high tone repeats every 15 minutes and the
voice advisory every 30 minutes until mute is disabled.
Disable mute: Press and hold the volume button for 1 second
until you hear a high/low tone followed by a voice saying “Mute
off” (in English).
Hands-Free Features
If your phone and your wireless service provider both support hands-free
operation, you can use the following features:
Redial the last
number you
called
Tap the call control button twice. You will hear two
low tones.
Voice activated
dialing
When the earpiece is on, press and hold the call
control button for 2 seconds until you hear 1 low tone.
WARNING Do not use earpiece at high volumes for an extended period of
time. Doing so can cause hearing loss. Always listen at moderate levels. See
www.plantronics.com/healthandsafety for more information on Earpieces and
hearing.
DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed.