User Manual

11
EN
DURATION: TAP is under 1 second. PRESS is 1-4 seconds as directed.
Range
To maintain a connection, keep your earpiece within 33 feet (10
meters) of the Bluetooth phone. If there are obstacles between your
earpiece and the phone you may experience interference. For optimal
performance, place your earpiece and phone on the same side of
your body.
Audio quality degrades as you move out of range. When you are
far enough away to lose the connection, you hear a voice say “Lost
connection” (in English), followed by a high tone.
The earpiece attempts to reconnect for 60 seconds. If you move back
in range, you can manually reconnect by pressing the call control
button.
NOTE Audio quality is also dependent upon the device with which the
Earpiece is paired.
Indicator Lights and Tones
Light Tone
Status check 1 white flash 1 tone
Charging 1 red flash every 10 seconds None
Fully charged None None
Low battery 2 red flashes for 2/3 full battery None
Very low battery 3 red flashes every
10 seconds
3 high tones every
10 seconds
Pairing Red and white flashes 1 low tone
Paired White flash 1 low tone
Turning on Solid white for 2 seconds Ascending tones
Turning off Solid red for 4 seconds Descending tones