Plantronics Explorer® 370 User Guide
Welcome Congratulations on purchasing a Plantronics headset. This guide contains instructions for setting up and using your Plantronics Explorer® 370 headset. Please refer to the separate Safety Instructions booklet for important product safety information prior to installation or use of the product. Getting Assistance The Plantronics Technical Assistance Center is ready to assist you.
Contents Welcome................................................................................................ii What is Bluetooth?................................................................................iv Package Contents and Features............................................................ 1 Plantronics Explorer® 370 Accessories*........................................ 1 Charging Your Headset..........................................................................
What is Bluetooth? Bluetooth wireless technology provides a way for devices to communicate with each other using short-range radio frequency instead of wires. Any two Bluetooth devices can communicate as long as they both have Bluetooth turned on, they are within range and they have been paired — a quick “handshake” process that connects the two devices. Bluetooth range is up to 33 feet (10 meters).
Package Contents and Features Call Control Button (On/Off) Indicator Light Volume Control Swivel Earloop Lanyard Microphone Eartip Charging Jack AC Charger 100 – 240V Plantronics Explorer® 370 Accessories* USB Headset Charger #76016-01 Vehicle Power Charger #78583-01 EN Vehicle Charging Adapter #76777-01 * Not included. To order, please contact your Plantronics supplier or go to www.plantronics.
Charging Your Headset 1 2 How to Charge Your Headset Using Only the AC Charger Before using your headset for the first time, charge it for at least 20 minutes. A full charge takes approximately two hours. 1 2 Connect the AC charger to a power outlet. Plug the AC jack into the charging jack on the headset. While your headset is charging the indicator glows red. When your headset is fully charged, the indicator turns off. Warning Do not use your headset while it is connected to the charger.
Pairing Your Headset Pairing is the process of introducing your headset to your phone. Before using your headset for the first time, you must pair it with your Bluetooth phone. Normally you need to pair your headset with your phone only once. To see a demo of the pairing process, visit www.plantronics.com/ EasyToPair. Plantronics QuickPair™ Technology Your new headset includes Plantronics QuickPair technology to simplify the Bluetooth setup process.
Pairing Your Headset 1 SETTINGS Time and Date Phone Settings Bluetooth Sound Settings Network Services 2 3 BLUETOOTH Discover/ Search 8BK;JEEJ> Security Reset Settings )NNFbWdjhed_Yi PASSKEY 4 0000 How to Pair Your Phone With Your Headset for the First Time 1 Turn on the Bluetooth feature on your phone. For most phones, select Settings/Tools > Connections > Bluetooth > On. See your phone’s user guide for more information. 2 Turn the headset on.
Pairing Your Headset 1 2 3 BLUETOOTH Discover/ Search 8BK;JEEJ> )NNFbWdjhed_Yi PASSKEY 4 0000 How to Pair Your Headset if it Has Been Previously Paired With Another Device 1 Turn the headset off. Press and hold the call control button until the indicator turns red and then turns off. 2 Turn the headset on. Press and hold the call control button until the indicator flashes red/blue. The headset is now in pairing mode. 3 Use the commands on your phone to locate your headset.
Adjusting the Fit 2 1 Right Left 1 2 Lift the ear loop. 3 4 Place the ear loop behind your ear. 5 Align the microphone with the corner of your mouth. Callers can hear you best when you point the microphone towards the corner of your mouth. Swivel the ear loop to the right to wear it on your left ear, or swivel it to the left to wear it on your right ear. Rotate the headset so that the eartip rests comfortably in your ear.
Attaching the Optional Lanyard 1 3 2 4 5 WARNING Certain activities may pose a risk of injury, including strangulation, if the lanyard should become wrapped around your neck. Use the lanyard with caution.
Headset Controls Turn on the headset Press and hold the call control button until the indicator glows blue. You will hear ascending tones. Turn off the headset Press and hold the call control button until the indicator glows red. You will hear descending tones. When power is off, indicator stays off. Answer a call Briefly press the call control button. When you receive a call, your phone may ring before your headset rings.
Headset Controls Transfer a call from headset to phone Press and hold the call control button until you hear a long tone. Transfer a call from phone to headset Press and hold the call control button until you hear a long tone. Range To maintain a connection, keep your headset within 33 feet (10 meters) of the Bluetooth device. If there are obstacles between your headset and the device you may experience interference. For optimal performance, place your headset and phone on the same side of your body.
Indicator Lights Headset Status Headset Indicator Light Powering on Blue flashes. Repeat. Powering off Red appears and goes off. Charging battery Red solid light. Low battery Red flashes. Pairing mode Blue/red flashes. Missed call Purple flashes. Single press the call control button to cancel. Ringing Purple flashes. Briefly press call control button to answer the call. Press call control button for 2 seconds to reject the call.
Hands-Free Features If your phone and your wireless service provider both support hands-free operation, you can use the following features: Redial the last number To activate last number redial, double press the call control button. You will hear a high tone after each double key press. Using Voice Dialing With the headset on, press the call control button for 2 seconds to activate the voice dialing. NOTE To use voice activated dialing, the voice dialing feature must be enabled on your phone.
Troubleshooting My headset does not work with my phone. Headset was not in pairing mode when mobile phone menu selections were made. See page 4 “Bluetooth Pairing.” Incorrect menu selections were made on your mobile phone. See page 4 “Bluetooth Pairing.” I did not enter my passkey. Your phone did not locate the headset. Repeat the pairing process on page 4. Incorrect menu selections were made on your mobile phone. Repeat the pairing process on page 4.
Product Specifications Talk Time* Up to 8 hours Standby Time* Approximately 8 days or 200 hours Charge Time 2 hours Range Up to Bluetooth standard 33 feet (10 meters) Power Requirements 5V DC – 180 mA Battery Type Lithium ion polymer Storage/Usage Temperature 32F – 120F (0C – 48C) Version Bluetooth 2.0 Supports Bluetooth hands-free and headset profiles. * Battery enabled. Performance may vary by device.
Limited Warranty This warranty covers defects in materials and workmanship of products manufactured, sold or certified by Plantronics which were purchased and used in the United States. The warranty lasts for one year from the date of purchase of the products. This warranty extends to you only if you are the end user with the original purchase receipt. We will at our option, repair or replace the products that do not conform to the warranty.
Regulatory Notices EXPOSURE TO RF RADIATION The internal wireless radio operates within the guidelines found in radio frequency safety standards and recommendations, which reflect the consensus of the scientific community. Independent studies have shown that the internal wireless radio is safe for use by consumers. Visit www.plantronics.com for more information. NOTE: Modifications not expressly approved by Plantronics, Inc. could void the user’s authority to operate the equipment.
Plantronics, Inc. 345 Encinal Santa Cruz, CA 95060 United States 800-544-4660 www.plantronics.com © 2007 Plantronics, Inc. All rights reserved. Plantronics, the logo design, Plantronics Explorer, QuickPair and Sound Innovation are trademarks or registered trademarks of Plantronics, Inc. The Bluetooth word mark and logo are owned by Bluetooth SIG, Inc. and any use of such marks by Plantronics, Inc. is under license. All other trademarks are the property of their respective owners. U.S.
