User Manual

Getting started
10
6. Close the battery door and make sure it
is properly locked in place (5).
■ Switching the headset on or off
To switch on: Press and hold the power key for 2 seconds. The headset
beeps and the green indicator light starts blinking. The blinking continues
until the headset is connected to your phone, within 5 minutes. If the
headset cannot be connected to your phone during this time, the headset
is switched off.
To switch off: Press and hold the power key for 2 seconds. The headset
beeps and the red indicator light is displayed briefly.
■ Taking the headset into use for the first time
1. Make sure that your phone is switched on.
2. Switch on the headset.
3. Enter your phone’s Bluetooth menu and make sure that the Bluetooth
feature is activated.
4. Enter the submenu where you can set the phone to search for
Bluetooth devices, and start the search.
hdw-2_1en.fm Page 10 Friday, October 4, 2002 10:32 AM