USER GUIDE Plantronics VOYAGER™ 510-USB BLUETOOTH ® HEADSET system 0 0 0
TABLE OF CONTENTS PACKAGE CONTENTS Package Contents 3 Features 4 Charging 5 Powering 6 Pairing Headset (Front and Side View) PerSono Suite Software CD 3 Ear Tips (Small, Medium, Large) Headset AC Charger 7 ® Installing PerSono Suite Software 9 Adjusting Fit 10 Using Your Headset 12 Indicator Lights 15 Troubleshooting 18 Technical Assistance 20 Warranty And Service 18 Regulatory Notices 18 Headset USB Charging Cable Please refer to the separate Safety Instructions
FEATURES CHARGING Horizontal Boom Adjustment Call Control Button Charge Connection Noise-Canceling Microphone with WindSmart® Technology AC Charging USB Charging AC Charging with Charging Stand USB Charging with Charging Stand Power/Mute Button Listen Volume Adjust Button +/Ear Tip Pairing/Connect Button Indicator Light Before using, you must first charge your headset. The indicator light flashes red while charging and turns solid blue when the headset is fully charged.
POWERING PAIRING Powering Headset Pairing Headset with Bluetooth Phone Press and hold the power/mute button for three seconds to turn the headset on or off. The indicator light flashes blue when the headset is on. The indicator light will flash red when the battery becomes low. Powering USB Bluetooth Adapter Before using your headset for the first time, you must pair it with your Bluetooth phone or device. Be sure the headset is fully charged.
PAIRING INSTALLING PerSono Suite SOFTWARE Pairing Headset with USB Bluetooth Adapter Plantronics PerSono Suite software provides the link between your Bluetooth headset and the softphone application on your computer. PerSono Suite software provides the ability to remotely detect and answer/end a call from your softphone application via the headset call control button. 2 sec. 1. With the CD inserted, go to the PerSono Suite main screen and click on “Install the PerSono Suite Software.” 2.
ADJUSTING FIT Inserting a New Ear Tip Wearing the Headset Rotate the microphone horizontally and vertically as illustrated, to select for left or right ear wearing. The illustration shows conversion from right to left ear wearing. Reverse the procedure to convert from left to right ear wearing. Replacing the Ear Tip Slide the headset over and behind your ear. Press gently towards your ear for a snug fit. Adjust the microphone position so that it is directed towards your mouth.
USING YOUR HEADSET Answering/Ending/Making Calls with PerSono Suite on Softphone Multipoint Versatility To make a call, simply dial the number via your softphone application. To answer or end a call, press the call control button When using PerSono Suite, the radio link between the headset and the USB Bluetooth adapter will only be active during a call. This is the default setting intended to preserve the battery life of the headset.
USING YOUR HEADSET INDICATOR LIGHTS Adjusting Volume Headset Indicator Lights To increase listening volume, press the upper end (+) of the volume button. To decrease listening volume, press the lower end (-). To adjust the listen or speak volume of the softphone, please refer to the softphone user documentation.
TROUBLESHOOTING FOR VOYAGER 510-USB Problem Solution Problem Solution My Voyager headset does not work with the softphone I am using on my PC. (I cannot answer or disconnect from the headset call button). • Check compatibility list on www.plantronics.com/ SoftphoneCompatibility to ensure your softphone is compatible for remote answer and disconnect. Sound in headset is distorted. I can hear echo in headset. • Lower the listen volume on your softphone until the distortion disappears.
TECHNICAL ASSISTANCE Visit our Web site at www.plantronics.com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Center (TAC) is also ready to assist you in the U.S. at 866-363-BLUE (2583) and in Canada at (800) 540-8363. WARRANTY AND SERVICE LIMITED WARRANTY for Plantronics Non-commercial Products Purchased in the United States and Canada.