User's Guide

• To position the microphone on the right or left side, rotate the microphone boom up and

over. Bend the boom so it is approximately 2 finger widths from the corner of your mouth.

NOTE Your headset senses when you change the microphone boom from one side to the other

and syncs the audio specific to each side.

• Gently flex the headband wider if the fit is uncomfortable on your ears.

Charge your headset using the micro USB cable or the charge stand (sold separately). The

headset LEDs flash when charging. It takes approximately 2 hours to fully charge your

headset. The LEDs turn off once charging is complete.

NOTE The micro USB cable and charge stand (sold separately) plug into a computer or wall

charger's USB port.

Micro USB cable Charge stand (sold separately)

Headset LEDs What they mean

Off Charging complete

Battery high

Battery medium

Battery low

Battery critical

Check your headset battery status:

• With headset inactive, slide and release the Power switch away from the off position.

Listen to the voice alert or observe the headset LEDs.

Fit and charge

Wear on the right or left

Charge

Check headset battery

status