USER GUIDE Plantronics VOYAGER ™ 510-USB BLUETOOTH® HEADSET system 0 0 0
PACKAGE CONTENTS WELCOME This User Guide provides instructions on the setup and usage of the Plantronics Voyager 510 USB Bluetooth headset system. Before getting started, please review the safety booklet included in your package. For additional help, service or support information, refer to the product warranty card or visit www.plantronics.com.
FEATURES CHARGING Horizontal boom adjustment Call control button Charge connection Status indicator light Noise-Cancelling microphone with WindSmart® technology USB charging Power/mute button Listen volume adjust button +/Ear tip Pairing/connect button Indicator light USB charging with charging stand Before using, you must first charge your headset. The indicator light flashes red while charging and turns solid blue when the headset is fully charged.
POWERING PAIRING Powering headset Pairing headset with Bluetooth phone Press and hold the power/mute button for three seconds to turn the headset on or off. The indicator light flashes blue when the headset is on. The indicator light will flash red when the battery becomes low. Powering USB Bluetooth adapter Before using your headset for the first time, you must pair it with your Bluetooth phone or device. Ensure that the headset is fully charged.
PAIRING INSTALLING PerSono Suite SOFTWARE Pairing headset with USB Bluetooth adapter Plantronics PerSono Suite software provides the link between your Bluetooth headset and compatible softphone applications on your computer. PerSono Suite software provides the ability to remotely detect and answer/end a call from your softphone application via the headset call control button. In addition, PerSono Suite provides some basic configuration and status information about the system. 2 sec.
ADJUSTING FIT Inserting a new ear tip Wearing the headset Rotate the microphone horizontally and vertically as illustrated, to select for left or right ear wearing. The illustration shows conversion from right to left ear wearing. Reverse the procedure to convert from left to right ear wearing. Replacing the ear tip Slide the headset over and behind your ear. Press gently towards your ear for a snug fit. Adjust the microphone position so that it is directed towards your mouth.
USING YOUR HEADSET Answering/ending/making calls with PerSono Suite on softphone Multipoint versatility To make a call, simply dial the number via your softphone application. The Voyager 510-USB headset has Multipoint Technology which allows you to switch seamlessly between two audio devices. You can answer a call from either your PC-based softphone or your mobile phone by pressing the call control button. The headset must be paired to both devices.
USING YOUR HEADSET INDICATOR LIGHTS Adjusting volume Headset indicator lights To increase listening volume, press the upper end (+) of the volume button. To decrease listening volume, press the lower end (-). To adjust the listen or speak volume of the softphone, please refer to the softphone user documentation.
TROUBLESHOOTING FOR VOYAGER 510-USB Problem Solution Problem Solution My Voyager headset does not work with the softphone I am using on my PC (I cannot answer or disconnect from the headset call button). • Check compatibility list onwww.plantronics.com/ SoftphoneCompatibility to ensure your softphone is compatible for remote answer and disconnect. Sound in headset is distorted. I can hear echo in headset. • Lower the listen volume on your softphone until the distortion disappears.
TECHNICAL ASSISTANCE Visit our web site at www.plantronics.com/support for technical support including frequently asked questions, compatibility and accessibility information. The Plantronics Technical Assistance Center (TAC) is also ready to assist you on 0800 410 014. AUT, BEL, DEU, DNK, ESP, FRA, GRC, ITA, IRL, LUX, NLD, PRT, SWE, FIN, CYP, CZE, EST, HUN, LVA, LTU, MLT, POL, SVK, SVN. GBR S O U N D I N N O VAT I O N www.plantronics.com © 2009 Plantronics, Inc. All rights reserved.
