Voyager Edge Series User Guide
Contents What's in the box 3 Headset overview 4 Charge case overview 5 Pair 6 Bluetooth pairing 6 NFC pairing 6 Pair Another Phone 6 Select language 7 Charge 8 Use the charge case Fit 10 Adjust the fit 9 10 The Basics 11 Make/Take/End Calls 11 Mute 12 Adjust the volume 12 Use Smart Sensors 12 Play or pause streaming audio 13 More Features 14 Voice alerts 14 Voice commands 14 Use two phones 15 Change headset settings 15 Update headset firmware 15 2
What's in the box Headset with medium eartip Car charger* Combo cable charger* Earloop Small and large eartip NOTE *Charger style may vary by product.
Headset overview Call button Volume button Charge port Mute button Voice button Play/Pause button Power button Headset LED (indicator light) 4
Charge case overview IMPORTANT Fully charge the charge case prior to use.
Pair NOTE If your phone supports Near Field Communication (NFC), go to NFC pairing. Bluetooth pairing 1 2 Wearing your headset, power it on. You hear “welcome” in all the supported languages and then "pairing" in the default language. The headset LED flashes red and blue. Activate Bluetooth® on your phone and set it to search for new devices. • iPhone Settings > Bluetooth > On* • Android™ > Bluetooth: On > Scan for devices* NOTE *Menus may vary by device. NFC pairing 3 Select “PLT_Edge.
Select language Once your headset is paired and connected to your phone, you can change the headset language. 1 Wearing your headset, power it on. 2 Press and hold the Volume up + and down – buttons together until you hear “welcome." The language selection directions repeat in every supported language. 3 Follow the voice-guided prompts to select the headset language.
Charge It takes 90 minutes to fully charge the headset. The indicator light turns off once charging is complete. TIP To reset the accuracy of the talk time prompt, deplete the headset battery then charge fully. TIP To check the headset battery status, tap the Call button Voice button while wearing your headset or tap the and say “check battery.
Use the charge case A fully charged case can supply an additional 11 hours of headset talk time. IMPORTANT Fully charge the charge case prior to use. Check the charge case or headset battery status by swiping either the case or headset icons. The LEDs indicate the battery status.
Fit Adjust the fit The loop of the gel eartip tucks into the back curve of your ear for a stable fit. 1 With the headset powered off, replace the eartip with one of the two alternate sizes if it feels loose or tight in you ear. 2 To adjust the fit, rotate the eartip on the headset or add the optional clip-on earloop.
The Basics Make/Take/End Calls Answer a call Choose: • Put on the headset to answer call, or • Say “answer” after call is announced, or • Tap the Call button Answer a second call First, tap the Call button call. End a call Tap the Call button to end current call, then tap the Call button again to answer new to end current call. Reject a call Choose: • Say “ignore” after call is announced, or • Press Call button for 2 seconds Call back last call Double-tap the Call button .
Caller Announcement (mobile phone only) When wearing your headset, you will hear the name of a contact calling you so you can decide whether to answer or ignore the call without having to check the phone screen.
Disable sensors To disable the sensors, hold both the Voice and Call buttons for more than 6 seconds until the LED flashes purple then red. Repeat to reactivate; the LED flashes purple then blue. NOTE Sensors cannot be disabled while streaming audio. Play or pause streaming audio A 2-second press of the Voice button audio.
More Features Voice alerts The available languages for voice alerts are Cantonese, English (UK and US), Danish, French, German, Italian, Japanese, Korean, Mandarin, Norwegian, Russian, Spanish and Swedish. You can change the language of voice alerts three different ways. • Select a new headset language using your headset (see Select language)* • Download and install the HUB app on your phone (visit plantronics.com/apps)* • Download and install the MyHeadset Updater tool (visit plantronics.
• "Call Vocalyst" • "Cancel" • "Check battery" • "Ignore" • "Pair mode" • "Redial" • "What can I say" NOTE The voice-dial feature on your phone is initiated by pressing the Call button for 2 seconds. The voice-dial feature is not a headset voice command and only works with supporting phones. 1 Disable the answer/ignore voice commands Power on the headset. 2 Press and hold the Voice button 3 Repeat to reactivate the voice answer commands. Use two phones until you hear “voice answer off.
NEED MORE HELP? plantronics.com/support Plantronics, Inc. Plantronics BV 345 Encinal Street South Point Building C Santa Cruz, CA 95060 Scorpius 140 United States 2132 LR Hoofddorp, Netherlands © 2014 Plantronics, Inc. All Rights Reserved. Bluetooth is a registered trademark of Bluetooth SIG, Inc. and any use by Plantronics is under license. All other trademarks are the property of their respective owners. Patents pending 202056-06 (02.
