Quick Start Guide

INTRODUCTION
Thank you for purchasing the PA1200. This Quick Start
process.
PACKAGE CONTENTS
1. Access Point
3. Open cable housing lid
4. Closed cable housing lid
5. Screws and screw plugs for various surfaces
The last point can be repeated to add as many Access
Points as needed.
You can now plug-in your Access Point and connect it to
the Internet.
a few seconds!
CLOUD MANAGEMENT
1.
2.
3.
4.
5.
6.
Sign up at console.plasma-cloud.com.
Organ-
. Fill in the form
and click Create.
You can now create your first network. Navigate to
Networks → Create new network, fill in the form and
click Create.
Network.
.
Go back to Overview and click on the map to add
your first Access Point.
PHYSICAL INSTALLATION
This Access Point is designed to be installed virtually
anywhere and can operate between 0°C ~ 40°C (32°F ~
104°F).
to install this device on various surfaces such as: ceilings,
walls, poles and T-rails of various sizes.
This Access Point can be powered by:
1. a 12-24V/1A DC power adapter
2. a 48-54V/0.5A PoE injector (802.3af/at)
SUPPORT
Feel free to visit for
department.
2
1
WALL MOUNTING
1
Use the provided screws and
screw plugs to fix the mount-
ing plate on the wall.
2
Slide the Access Point over
3
Your Access Point is now safely
T-RAIL MOUNTING
1
Slide the T-rail mount into the
slot of the Access Point.
2
mount bracket to the T-rail.
3
Your Access Point is now safely
clipped to the T-rail.
MOUNTING BRACKET OVERVIEW
US single
gang box
US double
gang box
EU/UK