DVD Player User Manual

Plasmon D875 - D2175 User Manual Menu System
Document Revision E Page 49
6 Function Counts
To view/reset total function counts since last reset of count.
Lift Movement Count
Picker 1 Move Count
Picker 2 Move Count
Change Picker Count
Pivot Col Move Count
Mag Door Open Count
Disk Flip Count
Cumul Lift Dist
Cumul Picker Dist
Cumul Pivot Rotation
3 Error Information Allows viewing/clearing of library error information.
1 Error Log
To view/clear a chronological list of last ten errors since log was last
cleared. The first on the list is the most recent.
2 Error Statistics
To view/clear a list of the ten most frequent errors since list was last
cleared.
3 Event History
To view/clear the SCSI command event history since it was last reset. Only
SCSI commands which affect library operations are recorded.
4 Micro-Op Stack
To view a list of operations performed for the last failing SCSI command.
These micro operations include position, flip, pick, store, load, and unload.
The list includes forward and backward operations (media movement, and
undo and retry for attempted failure recovery). This log is cleared whenever
the system is initialized. This error should be reported to Plasmon for
decoding.
4 Network Interface Not Used.
5 Offline Operations Allows basic offline operations.
1 Rescan Elements
Scans all storage slots and drives to identify media present.
2 Return All trays
Returns all magazine trays to their magazines.
3 Park Library
To park the picker before shipping or moving the library. Also, remove all
media before moving the library.
4 Test Library
To perform basic sensor and motor tests.
5 Service Drives
To turn a drive off and temporarily terminate the SCSI bus for drive replace-
ment.
6 Restore Drives
To turn a drive on and remove temporary SCSI bus termination after drive
replacement.
7 Bulk Load Library
Allows initial high speed bulk loading of required media.
8 Bulk Unload Library
Allows unloading the entire library for packing and shipping.
Menu Selection Description