Cut Sheet

1100 US Highway 271 South • Gilmer, TX 75644 Phone: [phone] • www.plastibond.com
PLASTI-BOND REDH
2
OT CONDUIT BODIES
PLASTI-BOND REDH
2
OT conduit bodies with covers are
offered in Form 8 and Form 7 styles, each with numerous
configurations to provide a complete coated conduit system.
May be used to make 90˚ bends, for pull outlets, to provide for
taps or splices, to act as a mounting outlet for wiring devices
or lighting fixtures etc.. Form 8 style fittings 1/2" – 2" have
an integral V-Seal gasket for superior corrosion protection.
Electrical continuity of the conduit system is maintained
across assembled joints.
• 40 mil gray PVC exterior
coating
• 2 mil red urethane internal
coating
• 10 trade sizes from 1/2"
through 4"
• Sealing sleeves on all
conduit openings
• Form 7 style cover uses
retained stainless screw
and wedge clip design
• Form 8 style cover uses
plastic encapsulated
stainless steel screws
with retainers built into
covers for trade sizes
1/2" through 2".
• Integral V-Seal gasket on
Form 8 style, sizes 1/2"
through 2"
• UL Listed Standard 514B
• CSA Standard: C22.2 No. 18
7
Conduit Bodies Specifications
CONDUIT BODIES AND COVERS FOR GENERAL SERVICE LOCATIONS
COMPLIANCES FEATURES APPLICATION
C FORM 7
Pipe FERROUS Nominal ALUMINUM
Size CATALOG # Weight A B C D E CATALOG #
1/2" PRC17 1.0 6.38 1.42 1.46 0.94 3.19 PRC17SA
3/4" PRC27 1.4 7.50 1.67 1.64 1.13 3.81 PRC27SA
1" PRC37 2.2 9.00 1.92 1.83 1.38 4.50 PRC37SA
1-1/4" PRC47 2.7 9.94 2.35 2.27 1.75 5.00 PRC47SA
1-1/2" PRC57 4.0 11.19 2.60 2.52 1.94 5.44 PRC57SA
2" PRC67 5.5 11.19 3.17 3.08 2.44 6.38 PRC67SA
2-1/2" PRC77 10.0 14.00 3.67 4.33 3.56 8.38 PRC77SA
3" PRC87 11.8 13.75 4.42 4.33 3.56 8.38 PRC87SA
C FORM 8 MARK 9
Pipe FERROUS Nominal ALUMINUM
Size CATALOG # Weight A B C D E CATALOG #
1/2" PRHC18 2.0 6.69 1.48 1.46 1.00 3.31 PRC19
3/4" PRHC28 2.3 7.78 1.73 1.27 1.19 3.94 PRC29
1" PRHC38 2.8 9.31 1.98 1.83 1.38 4.56 PRC39
1-1/4" PRHC448 4.5 11.00 2.42 2.27 1.75 5.31 PRC49
1-1/2" PRHC58 6.5 13.38 2.82 2.83 2.13 6.50 PRC59
2" PRHC68 10.3 14.25 3.60 3.83 3.00 8.56 PRC69
2-1/2" PRC78 18.0 17.63 4.48 5.08 4.25 10.88 PRC789
3" PRC88 20.5 17.63 4.85 5.08 4.25 10.88 PRC889
3-1/2" PRC989 10.0 20.75 5.73 6.33 5.44 13.44 PRC989
4" PRC1089 12.0 20.75 5.73 6.33 5.44 13.44 PRC1089
PRHLB28 PRHLR28
Conduit Bodies Technical Data
Note: Form 7 fittings are not available with encapsulated screws.
All cover screws are stainless steel. Form 8 fittings are shipped
with encapsulated screws.
APPROVAL STAMP
(See online product submittal guide at www.plastibond.com)
✔
Return To Index
Print This Page