Use and Care Manual

ManualsBrandsPlasti Dip ManualsIndustrial & Commercial PaintClassic Muscle 11 oz. Tropical Turquoise Spray

PLASTI DIP

CARE & USE MANUAL

[Date]

DESCRIPTION AND USES

Plasti Dip® is the original peelable, flexible,

durable rubber coating that protects against chips,

scratches, and breakage and is easily removable

from most surfaces. It can be applied to glass,

rope, wood, metal, stainless steel, plastic,

ceramic, brick, concrete—and much, much more.

We recommend testing in an inconspicuous area

first to make sure it will meet your needs and

expectations.

PRODUCTS

 Glossifier, Metalizers, Pearlizers, & Chameleons

must be applied over a cured Plasti Dip

coated surface to work properly.

 For best and viberant results, apply Plasti Dip

Blaze & Glow colors over a cured White Plasti

Dip coated surface.

PRODUCT APPLICATION

CONDITIONS

 We recommend applying when temperatures

range from 70 - 80°F, with humidity below 60%,

little to no wind. Avoid direct sunlight. Applying in

cool temperatures or high humidity can cause

longer drying times as well as surface

imperfections. Note: Plasti Dip will withstand -30

to 200°F, using for applications above or below

these temperatures is not recommended.

 Avoid spraying in windy and dusty conditions.

Cover surrounding area to protect from spray

mist. Use outdoors or in a well-ventilated area,

such as an open garage.

 If the aerosol can is cold when spraying, Plasti

Dip may have a poor & inconsistent fan spray,

coarse droplets, and sags-runs. We recommend

gently warming the aerosol can to room

temperature by placing in a warm room until the

can warms up. Shake can as normal and apply

as normal.

STORAGE

 Store Plasti Dip products in a cool, dry place.

PLASTI DIP SPRAY

 Black

 White

 Red

 Clear

 Blurple

 Flex Blue

 Black & Blue

 Black Cherry

 GunMetal Gray

 Camo Black

 Camo Tan

 Camo Green

 Camo Brown

 Blaze Orange

 Blaze Blue

 Blaze Pink

 Blaze Green

 Blaze Purple

 Blaze Yellow

METALIZERS

 Silver

 Gold

 Copper

 Blue

 Bright Aluminum

 Bright Gold

PEARLIZERS

 White

 Burnt Orange

 Cranberry

 Sapphire Blue

 Red Lava

 Green Gold

CHAMELEON

 Green/Blue

Chameleon

 Kaleidoscope

Summary of content (2 pages)

PAGE 1
PLASTI DIP® CARE & USE MANUAL DESCRIPTION AND USES Plasti Dip® is the original peelable, flexible, durable rubber coating that protects against chips, scratches, and breakage and is easily removable from most surfaces. It can be applied to glass, rope, wood, metal, stainless steel, plastic, ceramic, brick, concrete—and much, much more. We recommend testing in an inconspicuous area first to make sure it will meet your needs and expectations.
PAGE 2
PLASTI DIP® CARE & USE MANUAL PRIMING  Plasti Dip Primer increases adhesion by about 400% and is recommended for smooth surfaces such as plastics, metals, and stainless steel when a permanent application is desired. Note: Plasti Dip Primer is a permanent coating and is not peelable. 4. Allow 30 minutes minimum between coats. Apply as many coats as desired (4-5 average).