Table of contents CAUTION Warnings and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety and Handling Information WARNING For maximum product life, do not drop, throw, or crush the speaker. Do not expose it to humidity, dust, or operating temperatures outside 32°F to 113°F (0°C to 45°C). 1. C lose supervision is necessary when this appliance/ product is used by or near children or mentally disabled individuals. Save these instructions! 2. U se this unit only for its intended use as described in this manual.
8. N ever block the air openings of the unit with materials such as clothing, plastic bags or papers, or place it on a soft surface such as a bed or couch, where the air openings may be blocked. 9. D o not overload the electrical outlet. Use only the power source as indicated. 10. Do not carry this unit by its cord or use the cord as a handle. 11. Never operate this unit if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water.
• C onsult the dealer or an experienced radio/TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This equipment may not cause harmful interference. 2. This equipment must accept any interference received, including interference that may cause undesired operation. Modifications not authorized by the manufacturer may void the user’s authority to operate this device. Location of parts and controls 12 1.
Set up 1. C onnect the Adapter’s jack to the Power Port on the back of Big Blue. 2. Plug the Adapter into an electrical outlet. Pairing Big Blue to Bluetooth® Devices Pair your Bluetooth® device to the speaker when you turn the speaker on for the first time. 1. P ress and hold Main Power On/Off button on Big Blue until you see the LED RING surrounding the button blink. 2. Y ou are now are in pairing mode. Big Blue will remain in pairing mode for three minutes. 3.
Adjusting volume 1. A djust the volume of Big Blue’s sound by its touchsensitive controls. They are located on the top of the cabinet over the Main Power On/Off switch. 2. T ap the + or — icons to slowly increase/decrease the volume or place your finger on the symbols continuously to increase/decrease the volume at an accelerated rate.
SPECIFICATIONS TROUBLESHOOTING • Total 30W output • Full-range 2 x (2.5") Driver • Subwoofer (3") driver + Passive Radiator Issue Solution Disconnection due to Out of Range. Move back into the connection range of 33 feet and turn the speaker off and back on to reconnect to your Bluetooth® device. Sound is not clear or there is no sound at all. Turn the speaker off and then back on.
TROUBLESHOOTING (Continued) Issue Solution (cont.) Music won’t play on the speaker. Note: The speaker automatically syncs to the last device connected. If you need to reconnect to the first device that was connected, reconnect it manually. The speaker volume controls are not working. Change the volume from your Bluetooth® device.
One (1) Year Limited Warranty Big Blue Audio® warrants this product against defects in materials and/ or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser (“Warranty Period”).
Now you’re rockin’ Big Blue Wireless Speaker Big Blue Audio is synonymous with wireless sound.