User's Manual

Two Big Blue Mini speakers can be paired for stereo or left/
right sound. Identify which speaker will be the Main speaker
and which speaker will be the Auxiliary speaker as your device
only needs to pair with the Main speaker.
1. Pair your device (see page 11) with the Main speaker.
2. Press the POWER/PAIRING BUTTON on the Auxilary
speaker until the LED RING turns on and the power on
tone sounds.
Note: Do not put the Auxiliary speaker into device pairing
mode.
3. Press the Pair2 BUTTON on the Main speaker (the
speaker that is paired with your device). The LED
RING will start flashing and audio will pause on
the Main speaker. The Main speaker will wait for a Pair2
connection for up to 2 minutes.
4. Press and hold the Pair2 BUTTON on the Auxiliary
speaker until the LED RING starts flashing on the
Auxilary speaker.
5. Release the Pair2 BUTTON on the Auxiliary speaker.
6. After a few seconds, the LED RINGS on both the Main
Speaker and the Auxiliary speaker will be solid, the Pair2
stereo tone will sound on each speaker, and the speakers
will be in stereo mode.
7. Resume audio from your device.
8. To put the speakers in left/right mode, press and hold the
Pair2 BUTTON on the Main speaker or the Auxiliary
speaker until the Pair2 left and right tones sound on each
speaker. To put the speakers back into stereo mode, press
and hold the Pair2 BUTTON on the Main speaker
or the Auxiliary speaker until the Pair2 stereo tones sound
on each speaker.
9. To exit out of Pair2 stereo or left/right modes,
power either speaker off by pressing the POWER
BUTTON.
Notes:
• To cancel Pair2 pairing mode, either press the POWER/
PAIRING BUTTON on the Main speaker, a tone will sound
and the speaker will turn off, or wait 2 minutes for the Main
14 15
936007_ 936023_936027 Big Blue Mini Size:80mmWx80mmH_Output:100%_Prints:1/1,Blk
USING Pair2 FOR STEREO OR LEFT/RIGHT SOUND