Big Blue Studio WIRELESS SPEAKER Size:5”Wx4.
Location of Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Set-Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Pairing Your Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAVE THESE INSTRUCTIONS! DANGER To reduce the risk of electric shock, burns, fire or injury: 8. T he unit should be situated away from direct sunlight or heat sources such as radiators, electric heaters, heat registers, stoves, or other units (including amplifiers) that produce heat. Avoid placing on top of stereo equipment that radiates heat. 2. Do not place or store unit where it can fall or be pulled into a tub or sink. 9.
FCC INFORMATION RSS INFORMATION This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
LOCATION OF PARTS AND CONTROLS LOCATION OF PARTS AND CONTROLS 1. Bass/Volume/Treble LED Indicators (9) 6. Treble Mode LED Indicator 11. Aux Out Port 2. NFC Sensor 7. Mode Button 12. Aux In Port 3. LED Ring 8. Bass Mode LED Indicator 13. DC In Power Port 4. Bass/Volume/Treble Level + Button 9. Bass/Volume/Treble Level - Button 14. LED Ring On/Off button 5. Volume Mode LED Indicator 10. Power/Pairing Button 11 14 13 12 10 9 8 3 4 5 6 7 6 15 7 Size:5”Wx4.
SET-UP PAIRING YOUR DEVICE WITH NFC 1. Connect the AC ADAPTER’S jack to the DC IN POWER PORT on the back of Big Blue Studio. 1. Enable your device for NFC pairing. Refer to your device’s owners manual for details if necessary. 2. Plug the AC ADAPTER into an electrical outlet. 2. Touch your device to Big Blue Studio's NFC SENSOR. Confirm the connection on your device. PAIRING YOUR DEVICE USING BIG BLUE STUDIO AFTER PAIRING 1.
BLUETOOTH DEVICE SETTINGS USING AUX IN Many Bluetooth Streaming Devices have their own EQ sound settings. To optimize your Big Blue Studio listening experience, adjust the EQ settings on your Bluetooth Streaming Device. Consult your device’s user manual. Connect your audio device to the speaker with a 3.5mm-to-3.5mm cable (not included). 3. Press the — button to decrease the Bass. 4. The BASS LEVEL INDICATOR LEDs will indicate that the Bass level is adjusting. ADJUSTING TREBLE 1.
LED RING ON/OFF 1. Press the LED RING ON/OFF BUTTON to turn the LED RING off. 2. Press the LED RING ON/OFF BUTTON to turn the LED RING off. Note: When the LED RING is off, pressing any button will activate the function LEDs for 5 seconds. After 5 seconds has passed, the function LEDs turn off. FREQUENTLY ASKED QUESTIONS Why won't audio play? Ensure your device is within 33 feet of Big Blue Studio and reconnect your device to Big Blue Studio (please refer to page 8 for pairing instructions).
FREQUENTLY ASKED QUESTIONS (CONTINUED) How do I pair a new device? Big Blue Studio remembers the last device paired. If you would like to use another device, pair that device manually. Please refer to page 8 for pairing instructions. SPECIFICATIONS Power Supply (Input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . AC 100V~240V, 50/60 Hz Power Supply (Output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Obtaining Service: To obtain warranty service, call Brookstone Limited Warranty Service at 1-800-292-9819. Please be prepared to describe the product that needs service and the nature of the problem. A purchase receipt is required. All repairs and replacements must be authorized in advance. Service options, parts availability and response times will vary.
Find thousands more great ideas online 316218 Merrimack, New Hampshire USA 03054 • 800-846-3000 • Brookstone.