User's Manual

You can also use The Blaster as a “speakerphone” when connected via
Bluetooth. Incoming and outgoing calls will automatically pause music
playback, then resume when the call is ended.
Press both volume buttons at the same time to MUTE the microphone
during a call. The two LEDs will alternate ashing to let you know MUTE is
enabled. Press both buttons again to UNMUTE the microphone playback,
then resume when the call is ended.
TIP: The internal microphone is designed to pick up your voice from a
reasonably short distance (1m). It is not necessary hold The Blaster close
to your mouth.
ANSWER CALL
REJECT CALL
END CALL
REDIAL
2 SECONDS
+
Connect the USB Charging Cable between The Blaster and a USB port on
a notebook or desktop computer, or use the included USB to AC adapter.
While charging, the Power LED will ash in a repeating pattern to indicate
the current battery status as shown on the next page.
When charging is complete, the Power LED will stop ashing and illuminate
solid if The Blaster is already powered ON, or turn off completely if The
Blaster is powered OFF.
TIP: A full charge will take about 6 hours when connected the USB port of
a computer and only 3 hours when connected to a power source using the
included USB to AC adapter.
50cm cable, USB to micro-USB
(Provided)
50cm cable, USB to micro-USB
(Provided)
TALK IT UP CHARGE IT UP
MUTE
+