A5 SIZE IMMERSE UD‐1404 and UD‐1404S User Manual 2.1 Wi‐Fi / Bluetooth Multi‐Room Sound Bar with Wireless Subwoofer * Please read the instructions carefully before using the system and keep the manual for future reference.
Table of Content Inside the Box Precautions Product Introduction Overview Soundbar Subwoofer Remote Control Setup IMMERSE Placement Connect to TV Connect to DVD player Connect to other devices ‐ Wi‐Fi ‐ Bluetooth ‐ Ethernet ‐ Aux‐in / Analog / Optical / Coaxial Multi‐Room Sound Effect Mode Firmware Update Troubleshooting
Inside the Box Carefully unpack the carton and confirm that the following parts are included.
Precautions * Please read these safety instructions carefully to ensure your safety. • Do not use this product where contact with moisture, liquids, humidity or rain is possible to avoid electric shock and operating damage. • Avoid exposing this product to direct sunlight, stove tops or any other heat sources to prevent operating damage. • Do not cover the ventilation openings – this may cause overheating, damage to the product, and a hazardous condition.
• Consult the dealer or an experienced radio / TV technician for help. FCC Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Product Introduction The iui DESIGN UD‐1404 “IMMERSE” multi‐room 2.1 sound bar is a breakthrough in providing high performance audio to your TV and also the whole home. You’re in control – you can use sound bar with other iui DESIGN Wi‐Fi speakers. And the configuration options are almost limitless. Historically, if you wanted to listen to music from your TV or digital device, you could connect to your speaker with a 3.5mm audio cable, or Bluetooth. But IMMERSE provides you breakthrough flexibility.
Wi‐Fi: Using Wi‐Fi, you can connect your Wi‐Fi digital source (such as your TV, PC, Mac, tablet, smartphone, etc) to the IMMERSE sound bar or more Wi‐Fi speakers. The benefit of Wi‐Fi over Bluetooth is important – Wi‐Fi allows you to stream one source to IMMERSE sound bar and other iui DESIGN Wi‐Fi speakers all over your house (because Wi‐Fi typically has longer range), and the bandwidth of Wi‐Fi is much higher than Bluetooth, so the quality of the sound performance is essentially the same as a 3.
If you are using an iPhone or /and Android device, we have an app that makes it easy to set‐up your IMMERSE. You can use the app to connect the IMMERSE to your home network, you can name it (Living Room, Bedroom, Den), and you can assign IMMERSE and other iui DESIGN Wi‐Fi speakers to groups, so that you can play your music to one, some or all Wi‐Fi speakers and sound bar. The IMMERSE application also updates the software on your IMMERSE sound bar, keeping it current and up to date.
Overview Sound Bar Front Touch panel z z z z z POWER – Switch the soundbar and subwoofer on or to standby. SOURCE – Select an input source for the soundbar. MFB – Activate Bluetooth pairing mode in Bluetooth mode. VOL+ / VOL ‐ – Increase or decrease volume. SUB –Activate soundbar and subwoofer pairing mode. z z LED display panel – Show audio input selection NFC sensor – Pair with Bluetooth enabled devise with NFC feature Back z z z z z z z Power ‐ Switch the soundbar and subwoofer on or to standby.
z Wall mount holes – Mount M soun ndbar on waall with screews(not included) Sub bwoofer z z z S the subwoofer on o or off. Power – Switch DC jack – Connect with power so ource. Pairing bu utton – Activvate soundb bar and sub bwoofer pairing mode.
Remote Control Power– Switch the soundbar on or to standby. Wi‐Fi mode ‐ Select Wi‐Fi as an input source Bluetooth mode ‐ Select Bluetooth as an input source SOURCE – Select an input source for the soundbar.
Setup IMMERSE The IMMERSE sound bar transmits sound signal from audio source to the subwoofer by 2.4GHz wireless technology for reliable connection. Connect Soundbar to Subwoofer When the soundbar and subwoofer are connected to power source and powered on, they connect automatically and the LED on subwoofer turns green. If the connection between the subwoofer and the sound bar is lost … 1. Connect soundbar and subwoofer to power source. 2. Switch on the power of soundbar and subwoofer 3.
Placement IMMERSE offer 2 placement options of sounbbar to fit for different placements. For better sound experience, the soundbar should be placed at or close to ear level. Option 1: Tabletop Comes with rubber foot at the bottom of IMMERSE, place the IMMERSE soundbar on flat surface horizontally with the iui DESIGN logo facing out. Option 2: Wall Mounting Comes with screw holes at the back of the soundbar, follow the below steps to mount it on wall. 1.
Connect to TV After you finish setting up the IMMERSE system, it can connect to a TV using analog or optical audio input. Connect the soundbar and TV with a RCA cable / a digital optical cable as shown below. If you connect using a RCA cable, select “ANALOG” as the audio source. If you connect using a digital optical cable, select “OPTICAL” as the audio source.
Connect to DVD After you finish setting up the IMMERSE system, it can connect to a DVD player using analog, optical or coaxial audio input. Connect the soundbar and the DVD player with a RCA cable / a digital optical cable / a coaxial cable. If you connect using a RCA cable, select “ANALOG” as the audio source. If you connect using a digital optical cable, select “OPTICAL” as the audio source. If you connect using a coaxial cable, select “COAXIAL” as the audio source.
Connect to other devices After you finish setting up the IMMERSE system, it can connect to other devices, such as smartphones, tablets, PCs, video game consoles, etc. using the following connection options.
Wi‐Fi ‐ Connect to other devices After you finish setting up the IMMERSE system, it can stream music wirelessly from a digital music source through Wi‐Fi connection. Before Setup Please make sure your device is connected to the same Wi‐Fi network where IMMERSE will be located. Otherwise, an error message will appear after entering password as the app cannot detect IMMERSE in the current Wi‐Fi network. Setup for Android / iOS user 1.
6. Enter password for your Wi‐Fi network you chose#. The LED indicator turns to solid green. 7. Rename IMMERSE and tap “Save” the confirm. * If the IMMERSE could not be found in the list, follow the section “Reset Wi‐Fi Connection” to reset the speaker to factory default and try again. # In case of incorrect password or failed connection, follow the section “Reset Wi‐Fi Connection” to reset the speaker to factory default and start the setup procedure again.
Setup for PC / Mac user 1. Select “WIFI” as the audio source. 2. Connect IMMERSE to your PC / Mac using Wi‐Fi / RJ45 Ethernet cable. A. Use an Ethernet cable to connect IMMERSE and your device. It takes approximately 30 seconds to establish connection with IMMERSE. The LED indicator will turn to solid amber once the connection is completed. B. Search and connect “IMMERSExxxx” in Wi‐Fi setting page*. The LED indicator will turn to solid purple once the connection is completed. 3.
5. Select your Wi‐Fi network. 6. Enter password for your Wi‐Fi network you chose and Click “Join”. 7. Click “Done” and remove the Ethernet cable if you use it for setup#. * If the IMMERSE could not be found in the list, follow the section “Reset Wi‐Fi Connection” to reset the speaker to factory default and try again. # In case of incorrect password or failed connection, follow the section “Reset Wi‐Fi Connection” to reset the speaker to factory default and start the setup procedure again.
For PC User Windows Media Player 11 and above can be used to stream music to IMMERSE through "Play To" feature. Use "Play To" on your music library from Windows Media Player. For detail instruction for "Play To" feature, please consult the user manual for your specific device. For Mac User You can stream music to IMMERSE via iTunes: 1. Launch iTunes 2. Click AirPlay 3.
Advanced Setting Using the iui DESIGN Wi‐Fi Audio App, you can control the advanced setting of IMMERSE and other iui DESIGN Wi‐Fi speakers, including “Rename Your Speaker”, “Multi‐Room”, “Audio Channel” and “Firmware Update”. For multi‐room setting, see the section “Multi‐Room” for detailed instructions. For firmware update, see the section “Firmware Update” for detailed instructions.
Bluetooth ‐ Connect to other devices After you finish setting up the IMMERSE system, it can stream music wirelessly from a Bluetooth enabled device by setting or NFC (for NFC enabled devices only). By Setting ‐ Bluetooth Connection 1. Select “BT” as the audio source. 2. Press “Bluetooth” button on remote control to activate pairing mode. Or, touch and hold the MBF button on the soundbar touch panel 3. Turn on the Bluetooth feature on your device 4. Search “IMMERSE” and select. 5.
Ethernet ‐ Connect to other devices After you finish setting up the IMMERSE system, it can stream music wirelessly from a digital music source through Wi‐Fi connection while the IMMERSE system is physically connected with the Wi‐Fi router. Before Setup Please prepare a RJ45 Ethernet cable and a PC / Mac which has Wi‐Fi feature for setup. Setup 1. Select “LAN” as the audio source. 2. Search and connect“IMMERSExxxx” in Wi‐Fi setting page*.
Advanced Setting Using the iui DESIGN Wi‐Fi Audio App, you can control the advanced setting of IMMERSE and other iui DESIGN Wi‐Fi speakers, including “Rename Your Speaker”, “Multi‐Room”, “Audio Channel” and “Firmware Update”. For multi‐room setting, see the section “Multi‐Room” for detailed instructions. For firmware update, see the section “Firmware Update” for detailed instructions.
Multi‐Room “Multi‐Room” allows grouping IMMERSE and other iui DESIGN Wi‐Fi speakers to play together from the same music source. This feature only can be used in Wi‐Fi or Ethernet connection and with iui DESIGN Wi‐Fi Audio App, In the iui DESIGN Wi‐Fi Audio App, follow the below steps for multi‐room setup Slide the button to group the speakers. Stream music using Wi‐Fi connection.
Sound Effect Mode There are 3 pre‐set sound effect modes in IMMERSE: Music mode, Movie mode and Game mode. Different modes have different audio equalizer setting. You can choose the mode that fits your usage. Firmware Update “Firmware Update” allows updating the firmware of IMMERSE maintain the best product performance. It is strongly recommended that you always update your firmware, and regularly check to see if an update is available.
Troubleshooting TBA