User's Manual

AdvancedSetting
UsingtheiuiDESIGNWi‐FiAudioApp,youcancontroltheadvancedsettingof
IMMERSEandotheriuiDESIGNWi‐Fispeakers,including“RenameYourSpeaker”,
“Multi‐Room”,“AudioChannel”and“FirmwareUpdate”.

Formulti‐roomsetting,seethesection“Multi‐Room”fordetailedinstructions.
Forfirmwareupdate,seethesection“FirmwareUpdate”fordetailedinstructions.

ResetWi‐FiConnection 
IfyouwishtoconnectIMMERSEtoanotherWi‐Finetworkoryoucouldnotfind
IMMERSEinthelistofavailablewirelessnetworksinWi‐Fisettingpage,youneedto
resettheWi‐Ficonnection.Afterrestoringthefactorysetting,thenameofspeaker
willbesetas“IMMERSExxxx”.
ToresettheWi‐Finetwork,followthebelowinstructions:

1. ConnectIMMERSEtopowersource.Select“WIFI”astheaudiosource.
2. PressandholdMFB+VolumeUp+VolumeDownkeysfor4seconds.TheLED
indicatorwillflashred4timestoindicatethatthefactoryresetisdone.

*TheFactoryResetonlyappliestoWi‐Fimodewithno3.5mmline‐inconnection.
Ifyouwanttoresettothefactorydefault,pleasedisconnectthe3.5mmaudiolinein
cable.
