Information Sheet

Tele-TitanXg Crimp Tool
P/N 90170
3 Reshape the
end of the cable
using the CT-360
(PN 12360),
making it oval
so it slides into
the connector
with ease.
Your wire is ready to be inserted.
Insert the
prepped
connector into
the proper cavity
of the Tele-TitanXg
(P/N 12515C) crimper,
Squeeze handle to
terminate.
5
6 Roll up the drain wire and
place in the base of the
external ground. As you start
to bring the external ground
into place onto the cable, keep
the mass of drain wire tucked
in so it is totally covered.
7
Crimp the external
ground using the
CT-360.
Use the large or
small tool cavity
depending on the
size of your cable.
NOTE: DO NOT
over crimp the
external ground.
Bend down the external ground
onto the cable jacket and push
in the wing tips.
8
Large Cavity
Small Cavity
9 You are nished
We Make Connections EZ!
©2013 Platinum Tools, Inc. All rights reserved. 10Gig Termination System PF 6/13
806 Calle Plano
Camarillo, CA 93012
www.platinumtools.com
Phone: [phone] Fax: [phone]
2 Line up your wires
and make a clean
cut across all
8 conductors and
slide on the wire
guide bar.
(A) Slide bar down until snug with the end of the jacket.
(B) Cut across all 8 conductors leaving 3/16" of wire
protruding from wire guide bar.
B
A
4 Carefully insert into backend of connector (A) and push
all the way forward (B) until all 8 conductors are seated
ush against the front end.
NOTE: DO NOT use a standard RJ45 crimp tool. This connector
is designed with NO primary strain relief. Using a
standard RJ45 crimp tool will crush the connector.
A B
1 Strip & remove 1" of your
cable jacket with the
Cyclops
®
2 Cable Stripper
(P/N 15010C). Remove
cellophane and shield.
Straighten the wires.
Use the chart above to
determine whether
you will be using
the T568A or T568B
conguration and
organize wires accordingly.
10-Gig Shielded Connector
P/N 106190
Streaming media demands robust,
dependable networks, including 10-Gig
Cat6A shielded cable, to provide the
necessary expanded bandwidth. However,
these larger, shielded cables require special
connectors and tools.
Our 10-Gig shielded connector and
Tele-TitanXg crimp tool are specically de-
signed to terminate Cat6A cables. A pairing
that assures you will achieve 10-Gig perfor-
mance... a true 10Gig Termination System.
Ï
See Kit
Inside
RJ45 Cat6A/10-Gig shielded connector:
• Max cable OD: 8.5mm/0.335"
• Max conductor OD: 1.35mm/0.053"
• Meets 10-Gig performance standard
• UL and RoHS compliant
Tele-TitanXg Crimp Tool:
• Specically made for terminating, P/N 106190
• Straight action vertical crimp force
• Minimal hand force for a perfect crimp
Application:
• Cat6E • 10-Gig Cat6A
• Cat7
Tele-TitanXg Crimp Tool
P/N 12515C
RJ45
Cat6A/10-Gig
shielded connector
P/N 106190
For terminating
Cat6E, Cat6A, Cat7
and larger industrial
Ethernet cables.
10Gig Termination System
Instructions
Wire 1 2 3 4 5 6 7 8
T568A W/G G W/O B W/B O W/B B
T568B W/O O W/G B W/B G W/B B
T568A / T568B
Wiring Chart