User Manual

eal

mart

IS15021

Instruction Sheet

SealSmart Coaxial Cable Strippers

Cable Stripping & Termination

1. Cable strippers are color coded for cable type (see chart).

2. Open tool and place cable in tool. Close tool.

3. Using forefinger, rotate tool around cable 4-5 times.

4. Grasp jaws of tool with thumb & forefinger, hold closed.

5. Pull stripper straight off end of cable while holding closed.

6. Remove stripped cable & dielectric from jaws of tool.

7. Trim center conductor to proper length.

8. If using SealSmart Compression connector, fold braid back over

cable jacket prior to insertion into connector.

.236” (6 mm)

No adjustments required!

Cable Tool Color P/N

RG6 Quad Blue 15021

RG6 Black 15022

RG59 Red 15023

PAGE 1
Instruction Sheet SealSmart Coaxial Cable Strippers SealSmart IS15021 Cable Stripping & Termination 1. 2. 3. 4. 5. 6. 7. 8. Cable strippers are color coded for cable type (see chart). Open tool and place cable in tool. Close tool. Using forefinger, rotate tool around cable 4-5 times. Grasp jaws of tool with thumb & forefinger, hold closed. Pull stripper straight off end of cable while holding closed. Remove stripped cable & dielectric from jaws of tool. Trim center conductor to proper length.