User Manual

28
Specifications
Display Large 2.75” Backlit Monochrome LCD
Dimensions 6.8˝ x 3.2˝ x 1.4˝ (17.3 x 8.1 x 3.5 cm)
Weight 10.8 oz. (305 grams) with baery and
remote
Operang
Temperature
0˚C/32˚F to 50˚C/122˚F
Storage
Temperature
-20˚/-4˚F to 60˚C/140˚F
Humidity 10% to 90%, non-condensing
Maximum Voltage
between any two
connector pins
without damage
RJ12/RJ45/F: 50V DC or AC
Baery Life 9V alkaline baery typical
Standby: 4 years
Acve: 425 hours
Cable Types: Shielded or Unshielded; CAT7, CAT6A,
CAT5e, CAT5, CAT4, CAT3, Coax
Maximum Cable
Length Tesng
0 to 1,000 feet (305 meters)
Minimum Cable
Length for Split Pair
Detecon
1.5 feet (0.5 meters)
Maximum Coax
Cable Length
Varies depending on cable resistance.
5
VDV MapMaster
TM
3.0 Features
Cable Verification
• Test, Measure, and Map data, coaxial video and voice
cables
• Fault testing for opens, shorts, mis-wires, reverses and
split pairs
• Highly accurate length, opens and split detection using
capacitive technology
• Port Link-Blink to visually identify connected ports on a
switch or router
• Verify end-to-end grounding of shielded data cables
• Single-ended testing for shorts
• Wiremap testing to EIA T568A/B standards and cross-
over cables
• Loop mode for continuous testing
• Recognizes up to 20 unique remote ID numbers for map-
ping cables
• Built-in 4-cadence Tone Generator for audible tracing of
cable runs
• Auto-off and low power consumption for extended battery
life
Conveniences
• Built-in LED Flashlight
• Easy-to-read Large Backlit LCD Display
• Glow-in-the-Dark Buttons
• Audible Beep for Additional Feedback
• Ergonomic Slip-resistant Side Grips
• Self-stored Master Remote - Squeeze remote at finger
grip openings in main unit to remove
• RJ45, RJ12 and F-Jack on Main Unit and Remote