Quick Start Guide

PACKAGE CONTENTS

• Smooth Metal-Link Band

• Adjustment tool

FEATURES

ADJUSTING THE LENGTH OF YOUR

BAND

You can remove links to adjust the watch band length.

1 Turn the knob counter-clockwise to make room in the slot.

2 Place the band into the slot with the arrows on the

backside of the band face up and pointing away from the

pin removal rod, and then align the pin in the watch band

link with the rod.

3 Turn the knob clockwise so that the rod pushes the pin

partially out of the watch band link. Turn the knob

counter-clockwise to open the slot, and then remove the

watch band and pull the pin completely out of the band

link.

Knob

Pin-removal rodExtra pin-removal

rods

Inside bottom

cover

PTAWB42GLB / PTAWB42RGLB / PTAWB42SLB / PTAWB42BLB / PTAWB42GLB3 / PTAWB38GLB / PTAWB38SLB / PTAWB38BLB / PTAWB38RGLB / PTAWB38GLB3

SMOOTH METALLINK BAND FOR APPLE WATCH

QUICK SETUP GUIDE

Before using your new product, please read these instructions to prevent any damage.

• 3 pin-removal rods

• Quick Setup Guide

PAGE 1
PACKAGE CONTENTS • Smooth Metal-Link Band • Adjustment tool • 3 pin-removal rods • Quick Setup Guide 2 Place the band into the slot with the arrows on the backside of the band face up and pointing away from the pin removal rod, and then align the pin in the watch band link with the rod. FEATURES Inside bottom cover Extra pin-removal rods Pin-removal rod Knob ADJUSTING THE LENGTH OF YOUR BAND You can remove links to adjust the watch band length.
PAGE 2
4 Repeat steps 2 and 3 to remove the pin from the other side of the link, and then remove the link. Continue removing pins and links until the band is the desired length. TIP: Store the unused pins and links. REPLACING THE PIN-REMOVAL ROD 1 Open the bottom cover to find the two spare pin-removal rods in the tool. 2 Pull out the current removal rod with pliers and replace with a new one.