Operation Manual

10
For Macintosh® Users:
MAC
You are now able to enhance the resolution of your taken images by using the Digital
Camera Driver. The images can be converted to higher resolution automatically by using
a driver named “WWL Mac Installer”. Or you can use the “Digital Camera Driver” if you
want the resolution remain unchanged.
5.5 How to Install Digital Camera Driver Software
Note:
Macintosh® users may only choose one type of driver at a time to install (Digital Camera Driver
without enhancement or with enhancement). The driver cannot run properly if both drivers are
installed.
5.5.1 How to Install Digital Camera Driver (without enhancement):
MAC
1. Insert the CD-ROM disc into the CD-ROM drive and close the CD-ROM drawer.
2. Double click the CD-ROM icon “Digital Camera”.
3. Double click the “Digital Camera Installer” icon.
4. Click “Continue”.
5. Please disconnect all USB camera before continuing.
6. Choose a folder to install “STV0680 Capture” Plug-in le and click “Choose” to conrm.
Locate the “STV0680 Capture” Plug-ins le in Hard Disk if you have not install any
Photo-retouching software.
7. If you already installed PhotoStudio® 2000 and you want to use it as a
default software to retrieve the images from SPYPEN LUXO, go to “Plug-ins” folder in the
“PhotoStudio® 2000” folder and click “Select”.
8. Click “Quit” to nish the installation.
9. A folder named “STV0680 Camera Snapshots” will appear in your Hard Disk after
your SPYPEN LUXO is connected to your Mac via the USB cable for collecting images and
movies.
5.5.2 How to Uninstall Digital Camera Driver (without enhancement):
To uninstall the Digital Camera Driver (without enhancement), you have to remove 3
les located in different folders and restart your Mac. The 3 les are listed below.
“STV0680 Camera” in Control Panel Folder
“STV0680 Downloader” in Extensions Folder in System Folder
“STV0680 Capture” in Plug-ins Folder in the PhotoStudio® 2000