Operation Manual

14
7.1.4 Clear Memory
To clear all images that you have taken, simply press the Shutter Button when you are in
the Clear
mode. (see page 16)
7.1.5 Change Resolution
The Shutter Button can be used to switch between Hi-Res and Low-Res settings. To do
this, the memory must rst be cleared, and the resolution option selected. (see page 16)
7.2 Viewnder
The viewnder is the window you look through when you aim the SPYPEN LUXO. Make
sure you centre the subject in the viewnder before taking an image.
Important Note:
Due to the very small size of the viewnder, ensure your SPYPEN LUXO is perfectly parallel to the
subject you wish to take an images of. We recommended images are taken at a minimum distance of
2 metres from the subject.
7.3 LCD Display
By default, the 2 digit LCD screen displays the number of images remaining that can be
taken before the SPYPEN LUXO’s memory is lled. It is also used in conjunction with the
Mode Button to access and display the SPYPEN LUXO settings.
Images
Remaining
High Resolution
(Hi-Res) Mode
Low Resolution
(Low-Res) Mode
Clear Memory
Mode
Continuous
Mode
Low Battery Warning
(LCD will blink)
Self-timer
Mode
7.4 Mode Button
The Mode Button has 2 primary functions:
7.4.1 Turning your SPYPEN LUXO On from the Stand-by Mode
When your SPYPEN LUXO is in Stand-by Mode, press the Mode button to reactivate.
7.4.2 Cycling Through the Operating Modes
You can also use the Mode Button to cycle through the operating modes of your SPYPEN
LUXO. (For more details, see 8 Getting Started)
7.5 Power
7.5.1 Stand-by Mode
After a period of 30 seconds inactivity, the SPYPEN LUXO will switch to Stand-by Mode
automatically and the LCD will go blank. All images taken will not be lost as they are
stored in the SPYPEN LUXO’s memory.
Important Note:
It is important to note that any images stored in your SPYPEN LUXO’s memory will be lost if the
battery is totally drained or removed (and the USB cable is not connected to your SPYPEN LUXO to
your powered on PC or Mac). Please make sure your wanted images are uploaded to your PC or Mac
via the USB cable before changing or installing batteries.