Operation Manual

7.5.2 Low Battery

If the LCD display begins to blink

or is displayed, these are warnings that there is not

enough power left in your battery to fully operate your SPYPEN LUXO.

Important Note:

You must upload any stored images as soon as possible.

Important Note:

To use as a web-cam, you will require Internet access. To talk and listen, your computer will require a

sound card, speakers and microphone (not supplied).

8. Getting Started

8.1 Switching the SPYPEN LUXO On

Your SPYPEN LUXO will automatically switch on when you insert new batteries or connect

your SPYPEN LUXO to your PC or Mac via USB port. Press the Mode Button to turn on

your SPYPEN LUXO when your SPYPEN LUXO is in Stand-by Mode. The LCD will indicate

the

mode for high resolution and it will also display the number of images which may

be taken.

8.2 Taking an Image

Press the Shutter Button to take an image. The SPYPEN LUXO will beep. A high pitched

beep indicates that the image was taken successfully and the counter will count down. The

LCD screen displays the number of available images remaining.

• A low beep indicates insufcient light to take an image or the lens cover has not been

slide opened.

• A series of beeps indicates that the SPYPEN LUXO is full.

By pressing the Mode Button you can cycle through additional features as displayed on

the LCD. When a given mode is displayed it can be accessed by pressing the Shutter

Button (see section 7.1). If an option is not conrmed within 5 seconds the display will

revert to show the number of available images that can be taken.