Operation Manual
16
8.3 Continuous Mode
(see 10.4 Creating and Uploading Movie Clips)
To create a movie clip:
1. Press the Mode Button until the
appears on the LCD.
2. Press and hold the Shutter Button within 5 seconds to start taking continuous images.
When you are in Low-Res mode, the SPYPEN LUXO will allow you to take 80 images.
In Continuous Mode, the counter will rapidly decrease accompanied by a series of rapid
beeps as each image is taken. If the Shutter Button is not pressed within 5 seconds the
SPYPEN LUXO will revert to the normal image taking mode.
Important Note:
During the Continuous Mode the SPYPEN LUXO will allow images to be taken with insufcient light.
8.4 Self-Timer Mode
To use the self-timer feature, press the Mode Button until
appears in the LCD then
press the Shutter Button to start a 10 second self-timer. The SPYPEN LUXO will issue
a short beep every second and then a long beep just prior to a further short beep which
indicates that the image has been successfully taken. It is a good idea to use the stand
for this.
Important Note:
The Self-Timer Mode cannot be selected when the SPYPEN LUXO is full.
8.5 Clearing the Stored Images
When you wish to clear the memory of your SPYPEN LUXO, press the Mode Button until
appears on the LCD. Pressing the Shutter Button once will cause the SPYPEN LUXO
to beep and the
start ashing. Pressing the Shutter Button again within 5 seconds
will clear all the images stored and reset the image counter.
Important Note:
• Individual images cannot be cleared
• All images will be lost when the memory is cleared. Please make sure you upload your wanted images
before clearing your SPYPEN LUXO’s memory.
8.6 Changing the Image Resolution
Image resolution can be changed whenever you need.
1. Cycle through the Mode options by pressing the Mode Button.
2. Press the Shutter Button once to change to the alternative resolution.
For Example:
Changing from Hi-Res Mode to Low-Res Mode:-
Press the Shutter Button to Conrm
Changing from Low-Res Mode to Hi-Res Mode:-
Press the Shutter Button to Conrm