Operation Manual
29
11.7 How to use PhotoStudio® 2000
For Macintosh® Users
MAC
1. Before you use PhotoStudio® 2000, make sure the “STV0680
Capture”/”WWL Mac Import” is placed in the Plug-ins folder in
the PhotoStudio folder.
2. Double click the “PhotoStudio®” icon from the PhotoStudio® .
Import le without
enhancement
WWL MAC Import
Import le with
enhancement
STV0680 Capture
You can now start to download your stored images from your
SPYPEN LUXO by the following steps:
3. Go to “File” and then select “STV0680 Capture”/”USB Camera
Import”. The capture interface will show up.
• To capture 1 image, select the wanted image and click
“Import”. Click “Close” to leave the capture interface.
• To capture all images, click “Select All” and then click “Import”.
Click “Close” to leave the capture interface.
You can now edit your image(s) with PhotoStudio’s features.
4. For further help on how to use PhotoStudio® 2000, go to “Help” to access the Help
Topics.
Visit http://www.arcsoft.com for all your FAQ’s, tips and technical support. See Section
13 for more details.
MAC
11.8 How to use ArcSoft PhotoFantasy™ 2000
1. Double click the “PhotoFantasy™” icon from the
PhotoFantasy™.
2. Click “Get Fantasy” to select the template in the existing
library and then click “OK” to conrm.
Important! Make sure the “Digitial Camera” CD-ROM is in the
CD-ROM Drive.
3. Double click on “Get Photo 1” and click “Add”. Find the
image you want which you have already saved in your hard
disk and click “Open”. The selected images will be shown
on the left hand side. Click “OK”.