Operation Manual

11
Using the images stored in your SPYPEN MEMO:-
3. Double click on “Get Photo 1” and click “Acquire”. Select “Spypen Memo Camera” as the source.
The capture interface will show up.
To capture image(s), scroll
through the image(s) stored in our camera and click “Transfer”. When
you have finish, click on “Cancel” to go back to window.
Acquire
4. The captured images will be shown in the window. Select the image you want and click “OK”.
5. The selected image will shown within the “mask” on the selected template. You can play with the image
by using the function icons.
“Mask”
Using live images:-
6. You can also capture a live shot when your SPYPEN MEMO is connected to your PC by the following
steps:
7. Click “Get Fantasy” to select the template in the existing library and then click “OK” to confirm.
Important! Make sure the “My Camera” CD-ROM is in the CD-ROM Drive.
8. Click the icon on the top to start the live shot mode. A “Video for Windows Driver Options”
dialogue box will pop up. Select “Spypen Stylus Camera” and click “OK”.