Operation Manual

• Installing the batteries

Backup Battery Replacement

The backup battery is designed to be used only for short intervals whilst you are replacing the 2 x AAA

batteries. The backup battery maintains the memory of your SPYPEN MEMO when you want to replace

your batteries and when you have images stored in your SPYPEN MEMO and you are not able to upload to

your computer. Removal of this battery will mean the loss of any images currently stored in your SPYPEN

MEMO.

CR2025

1. Press and slide the battery door downwards (as shown on the diagram). Remove

the 2 x AAA alkaline batteries from the battery compartment.

2. Remove the button cell CR2025 from the backup battery compartment and

insert a new one back.

3. Insert the 2 x AAA alkaline batteries back into the battery compartment (Make

sure you follow the correct polarity (+) (-) as indicated.)

4. Push and slide the battery door upwards to close the battery door.

Note:

We recommend the user to change the backup battery (CR2025) every 3 months.

Battery Replacement

4 x AAA Alkaline batteries are supplied with the product (2 for the camera and 2 for the flashlight (optional))

The flashlight is covered in a future section.

AAA

CR2032

AAA

1. Open the camera battery door by sliding the door downwards.

2. Insert the batteries as shown, ensuring you follow the +/- signs correctly.

3. Close the battery door.

• Turning the Camera On and Off

Back View

Mode Button

LCD Display

To turn the camera on, firmly press the Mode button M. The LCD display

will come on after a few moments. To turn the camera off, press and hold

down the Mode button. The camera will bleep and the LCD display will

switch off.

• Checking the battery level

Check the battery power level before taking pictures.

HIGH

1. Turn the camera on.

2. Check the battery status level that appears on the camera LCD screen

batteries have adequate power..

batteries need to be replaced.

• Automatic power off saves batteries

Your Camera is designed to switch off automatically and save battery life without losing the pictures taken

after 60 seconds of non use. Press the Mode button to reactivate the camera.