Installation & Assembly

page 3
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this table.
•
The table must be turned over before assembling its Legs, then turn it over again to assemble player rods .
FIG. 1
CAUTION:
Two strong adults are recommended
to turn the
table over as shown.
1. Lift the table off the ground.
2.
3. Place it on all four feet at the same time on the ground.
Turn the table over.
NO APOYE LA MESA
EN SUS PATAS
SOSTENGA
LA MESA
GABINETE
NO SOSTENGA LAS PATAS
DO NOT LEAN THE
TABLE ON ITS LEGS
HOLD TABLE
CABINET
DO NOT HOLD THE LEGS
•
•
Attach the Legs (#2 & #3) between the Side and End Aprons with four Bolts (#11) per Leg as shown in Fig.1. Use the
Allen Key (#14) provided.
NOTE:
Please twist the four Bolts(#11) into one leg at the same schedule when you assemble the Legs . (Don’t twist the
Bolts very tightly at once .) .
•
Insert the Leg Levelers (#12) into the bottom of the Legs (#2 & #3) . See Fig.1.
Lift the table assembled from the floor by two strong adults,turn it over, and set table on its legs in the location where
you will play.
2
3
11
2
3
12
1
We suggest that you use the packing EPE as clean flat work area to protect the table.
•
FIG. 1: LEG ASSEMBLY