Installation & Assembly

page 4
FIG. 2: PLAYER / BEARING / SCORER ASSEMBLY
•
•
•
Carefully slide the grip end of Player Rod (#6) through the inside of Side Apron to outside ( unll the Player touch the
Side Apron ) , then slide another end of the Player Rod ( #6 ) through the directly opposite hole in the opposite Side
Apron .
Aach all the Bearings in the accessory kits to the Side Aprons as shown Bearing (#8) in Fig.2.
Aach the Scorer Assemblies(#13) in the middle of each Top Slat Board using two Screws(#10) per Scorer.See Fig.2 .
Spray the Lubricant (#16) in a clean , so cloth first , then use this cloth to wipe the Player Rods . See Fig.3 .
Slide the Player Rods(#4-#7) through the Side Apron in the order shown . See Fig .2 .
•
•
= BLACK,
= YELLOW
, ,
IMPORTANT!
EACH TEAM SHOULD BE HEAD
UP AND FACING THEIR OWN
GOAL
ORDER OF PLAYERS
/ ORDEN DE JUGADORES
FIG. 2FIG. 2
FIG. 3
6
8
5
4
7
6
7
8
9
5
4
a
b
13
13
10