User manual

Mixer Linking continued

In order to link mixers you will need a 9 pin female to female DSUB cable. An inexpensive computer RS232 cable would

probably suce, (as long as it is connected pin 1 to pin1, pin 2 to pin 2 etc.), as all Mix buss connecons are fully

balanced, however for best performance we would strongly recommend using an audio grade cable.

LINK OUT Pin connecons

1 = Mix Out Le Hot +

2 = Mix Out Right Hot +

3 = Mix Out Le Cold -

4 = Mix Out Right Cold -

5 = Ground

6 = Cue B IN Right

7 = Cue B IN Le

8 = Cue A OUT Right

9 = Cue A OUT Le

LINK IN Pin connecons

1 = Mix IN Le Hot +

2 = Mix IN Right Hot +

3 = Mix IN Le Cold -

4 = Mix IN Right Cold -

5 = Ground

6 = Cue B OUT Right

7 = Cue B OUT Le

8 = Cue A IN Right

9 = Cue A IN Le