Building Instructions

129
1. SETUP OPERATION
5
SETUP
COROLLA_14CY_Navi_EE
z Once you have connected the Bluetooth
®
device, it is automatically connected
whenever the engine switch is in the fol-
lowing status.
XVehicles without smart entry & start sys-
tem
The engine switch is turned to the “ACC”
or “ON” position.
XVehicles with smart entry & start system
The engine switch is turned to ACCESSO-
RY or IGNITION ON mode.
■PAIRING FROM THE DEVICE
1 Select “Make system discoverable”.
XWhen another Bluetooth
®
device is con-
nected
z To disconnect the Bluetooth
®
device,
select “YES”.
XWhen 4 Bluetooth
®
devices have al-
ready been paired
z A paired device needs to be replaced.
Select “OK”, and select the device to be
replaced.
2 When this screen is displayed, search
for the device on the screen of your
Bluetooth
®
device.
z To cancel the registration, select “Can-
cel”.
3 Pairing the Bluetooth
®
device using
your Bluetooth
®
device.
z A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth
®
devices. Depending on the
type of Bluetooth
®
device being con-
nected a message confirming registration
may be displayed on the Bluetooth
®
device’s screen. Respond and operate the
Bluetooth
®
device according to the confir-
mation message.
INFORMATION
● For details on device detection and the
operation of your Bluetooth
®
device, see
the manual that comes with the
Bluetooth
®
device.
● The music profiles the paired device
supports can be connected individually
as desired. Some devices do not allow
individual profiles to be connected. In
that case, a pop-up window is displayed.
Corolla_Navi_EE_12J57E.book 129 ページ ２０１４年３月３日 月曜日 午後１時４４分