Building Instructions

134
1. SETUP OPERATION
COROLLA_14CY_Navi_EE
1 Select “Paired device list”.
2 Select the desired device.
z Dimmed icons can be selected to connect
to the function directly.
z The tone of the icons show which profiles
the device supports. (Dimmed icons are
not available.)
z The device’s currently connected profiles
are highlighted.
3 Check that the following screen is dis-
played.
■CHANGING THE DEVICE NAME
1 Select “Rename”.
2 Enter the device name and then select
“OK”.
■DELETING A PAIRED DEVICE
1 Select “Delete pairing”.
2 Select “Yes” when the confirmation
screen appears.
PAIRED DEVICE LIST
Each profile connection status can be
changed from the “Paired device list”.
No. Function Page
Select to change the de-
vice name.
134
Select to delete the paired
device.
134
Select to connect/discon-
nect individually a paired
device’s profiles.

XWhen “Connect all”
displayed
• Select to connect all sup-
portedprofiles.
XWhen “Disconnect all”
displayed
• Select to disconnect all
supported profiles.

Corolla_Navi_EE_12J57E.book 134 ページ ２０１４年３月３日 月曜日 午後１時４４分