Building Instructions

149
1. REAR VIEW MONITOR SYSTEM
COROLLA_14CY_Navi_EE
6
REAR VIEW MONITOR SYSTEM
THE CAMERA
The camera for the rear view monitor
system is located as shown in the illus-
tration.
USING THE CAMERA
If the camera lens becomes dirty, it
cannot transmit a clear image. If water
droplets, snow or mud adhere to the
lens, rinse with water and wipe with a
soft cloth. If the lens is extremely dirty,
wash it with a mild cleanser and rinse.
NOTICE
The rear view monitor system may not
operate properly in the following cases.
If the back of the vehicle is hit, the
position and mounting angle of the
camera may change.
As the camera has a water proof con-
struction, do not detach, disassemble
or modify it. This may cause incorrect
operation.
• Do not strongly rub the camera lens. If
the camera lens is scratched, it cannot
transmit a clear image.
Do not allow organic solvent, car wax,
window cleaner or a glass coating to
adhere to the camera. If this happens,
wipe it off as soon as possible.
If the temperature changes rapidly,
such as when hot water is poured on
the vehicle in cold weather, the system
may not operate normally.
When washing the vehicle, do not
apply intensive bursts of water to the
camera or camera area. Doing so may
result in the camera malfunctioning.
Do not expose the camera to strong
impact as this could cause a malfunc-
tion. If this happens, have the vehicle
inspected by your Toyota dealer or
another duly qualified and equipped pro-
fessional as soon as possible.
Corolla_Navi_EE_12J57E.book 149 ページ 2014年3月3日 月曜日 午後1時44