Building Instructions

204
5. MY DESTINATIONS
COROLLA_14CY_Navi_EE
■LOADING POIs AND ROUTES VIA A
USB MEMORY
1 Open the cover of the auxiliary box and
then open the cover of the USB/AUX
port.
2 Connect a USB memory.
3 Display the “Navigation” menu screen
and select “Enter destination”.
(→P.163)
4 Select the “Advanced” tab.
5 Select “Load POIs and routes from
USB”.
6 Check that a progress bar is being dis-
played while the data loading is in
progress.
z To cancel this function, select “Cancel”.
7 Check that a confirmation screen is
displayed when the operation is com-
plete.
8 Check that the entry is registered in the
“Stored” list on the “My destinations”
screen. (→P.200)
REGISTERING FROM AN
EXTERNAL DEVICE
“vCards” formatted data can be trans-
ferred from a USB memory to this sys-
tem. Transferred POIs and routes will
be stored in the “Stored” list on the “My
destinations” screen. (→P.200)
INFORMATION
● Downloading may not complete cor-
rectly in the following cases:
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the “LOCK” position during down-
loading.
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
• If the USB memory is removed before
downloading is complete
● If the maximum number of possible
stored contacts has been reached, a
confirmation screen appears.
Delete contact(s) to make room for new
contact(s). (→P. 83)
Corolla_Navi_EE_12J57E.book 204 ページ ２０１４年３月３日 月曜日 午後１時４４分