Building Instructions

209
5. MY DESTINATIONS
COROLLA_14CY_Navi_EE
7
NAVIGATION SYSTEM
3. SENDING AND RESTORING STORED CONTACTS USING A USB MEMORY
1 Open the cover of the auxiliary box and
then open the cover of the USB/AUX
port.
2 Connect a USB memory.
3 Press the “SETUP” button.
4 Select “General”.
5 Select “Backup stored contacts to
USB”.
6 Check that a progress bar is being dis-
played while the data sending is in
progress.
7 Check that a confirmation screen is
displayed when the operation is com-
plete.
SENDING STORED
CONTACTS TO A USB
MEMORY
The entries stored in the “Stored” list
on the “My destinations” screen and
“Contacts” screen (→P.86, 200) can
be transferred to a USB memory.
INFORMATION
● Downloading may not complete cor-
rectly in the following cases:
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the “LOCK” position during down-
loading.
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
• If the USB memory is removed before
downloading is complete
Corolla_Navi_EE_12J57E.book 209 ページ ２０１４年３月３日 月曜日 午後１時４４分