Building Instructions
246
2. CONNECTED SERVICE
COROLLA_14CY_Navi_EE
6. LOADING POIs/ROUTE
∗
1 Display the “Navigation” menu screen
and select “Enter destination”.
(→P.163)
2 Select the “Advanced” tab.
3 Select “Load POIs and routes from
server”.
4 Check that a loading the data screen is
displayed.
5 Check that a confirmation screen is
displayed when the operation is com-
plete.
z The entry is registered in the “Stored” list
on the “My destinations” screen. (→P.81)
POIs and routes can be added by
downloading from the Toyota portal
site. They will be stored in the “Stored”
list on the “My destinations” screen.
(→P.81)
DOWNLOADING VIA A
CELLULAR PHONE
∗
: With navigation function
INFORMATION
● Downloading may not complete cor-
rectly in the following cases:
• Vehicles without a smart entry & start
system: If the engine switch is turned
to the “LOCK” position during down-
loading.
• Vehicles with a smart entry & start sys-
tem: If the engine switch is turned off
during downloading.
● If the “Automatic download of POIs
and routes” function is on, POIs and
routes from the server will be down-
loaded automatically. (→P.137)
● If the maximum number of possible
stored contacts has been reached, a
confirmation screen appears. Delete
contact(s) to make room for new con-
tact(s). (→P. 83 )
DOWNLOADING FROM A
USB MEMORY
For details about downloading from a
USB memory. (→P.204)
Corolla_Navi_EE_12J57E.book 246 ページ 2014年3月3日 月曜日 午後1時44分