Instructions / Assembly

11
Front Tower Roof Assembly - GOLD
3
8¹|₂"
3
8¹|₂"
38¹|₂"
38¹|₂"
3
8¹|₂"
3
8¹|₂"
38¹|₂"
38¹|₂"
I
tems for
STEP 1:
(
2) 2" x 4" x 38¹⁄₂" boards
(2) 2" x 4" x 35" boards
(2) Roof Caps
(12) #14 x 1¹⁄₄" pan head screws
I
tems for
STEP 2:
(
2) Step 1
A
ssemblies
(4) 5/4" x 6" x 48" boards
(16) #8 x 2¹⁄₂" deck screws
Items for STEP 3:
(10) 5/4" x 6" x 48" boards
(40) #8 x 2¹⁄₂" deck screws
Items for STEP 4:
(1) 2" x 4" x 37" board
(1) 2" x 4" x 35¹⁄₂" board
(28) #8 x 2¹⁄₂" deck screws
On a flat surface position boards together as shown.
Keep boards square while attaching roof cap to
boards with #14 x 1¹⁄₄" pan head screws.
Repeat for second assembly.
Approximate 3¹⁄₂"
overhang each side.
3¹|₂"
3¹|₂"
41"
H
H
Important do not
exceed 41"
Start at the top and attach boards between top and bottom
boards as shown. Secure with #8 x 2¹⁄₂" deck screws.
Note: If the last board doesn’t fit because the boards
are oversized, remove the bottom board and
reattach.
Repeat for other side.
H
H
Step 1 Assemblies
SEE PAGE 7 FOR
HOLE PATTERNS
90
˚
5/4" x 6" x 48"
5/4" x 6" x 48"
2
"
x
4
"
x
3
5
"
2
"
x
4
"
x
38
¹₂
"
2" x 4" x 37"
2" x 4" x 35¹₂"
Hold assemblies 41" apart. Position boards
flush at the top and bottom as shown.
Keep boards square and secure
with #8 x 2¹⁄₂" deck screws.
Repeat for other side.
9
0˚
From the underside of roof assembly, place 2" x4"x37"
board flat against roof assembly centered as shown.
Secure with two #8 x 2 ¹⁄₂ " deck screws per each roof
board.
Place 2" x 4" x 35¹⁄₂" board
flat against roof assembly
and the 2" x 4" x 37"
board. Secure with
#8 x 2 ¹⁄₂ " deck screws.
SEE PAGE 7 FOR
HOLE PATTERNS
(Approximate overhang)
(Drill Hole Location)
4¹|₄"
3¹|₂"
Flip template over and
slide to 4¹|₄" placement.
H