Instructions / Assembly
28
Items for STEP 6:
(9) 5/4" x 6" x 21¹⁄₂" boards
(36) #8 x 2¹⁄₂" deck screws
5/
4
"
x
6
"
x 2
1
¹
|
₂
"
Cl
i
m
i
ng
Rop
e H
ol
e
s
Items for STEP 7:
(1) Monkey Ring Base Assembly
(2) Monkey Ring Beam Assemblies
(4) ³₈" x 3" lag screws
(4) ³₈" flat washers
(16) #8 x 2¹⁄₂" deck screws
G
G
G
G
Position base assembly approximately six feet
from tower opening. Position beam assemblies
as shown. Secure with #8 x 2¹⁄₂" deck screws,
³₈" x 3" lag screws and ³₈" flat washers.
TURN TO PAGE 44 FOR
10' SWING STATION ASSEMBLY
SEE PAGE 7 FOR
HOLE PATTERNS
E
E
Position first 5/4" x 6" x 21¹⁄₂" board tight at the top
as shown. Secure with #8 x 2¹⁄₂" deck screws.
Position next 5/4" x 6" x 21¹⁄₂" board tight against
first board. Secure with #8 x 2¹⁄₂" deck screws.
Repeat for remaining boards.
Hole placement for Climbing Rope:
Drill a ³₄" hole in center of boards shown. Install rope
per instructions on Page 76.
SE
E
PA
GE
7 FO
R
HOLE PATTERNS