Instructions / Assembly

42
5/4" x 6" x 24" (9)
Guardrails
Items for STEP 9:
(9) 5/4" x 6" x 24" boards
(36) #8 x 2¹⁄₂" deck screws
5/4" x 6" x 48" (10)
Climbing
Rope Holes
Items for STEP 10:
(10) 5/4" x 6" x 48" boards
(100) #8 x 2¹⁄₂" deck screws
SEE PAGE 7 FOR
HOLE PATTERNS
SEE PAGE 7 FOR
HOLE PATTERNS
Position seven boards on the inside
and two boards on the outside of
the tower flush with the top and
bottom of guardrail boards and
equally spaced as shown. Secure
with #8 x 2¹₂" deck screws.
Caution: Gap between boards
must not exceed 3¹⁄₂"
or a head entrapment
could exist.
H
F
F
Position first 5/4" x 6" x 48" board
flush with the top of deck. Secure
with #8 x 2¹₂" deck screws.
Position next 5/4" x 6" x 48" board
tight against the bottom of first board.
Secure with #8 x 2¹₂" deck screws.
Repeat for remaining boards.
Hole placement for Climbing Rope:
Drill a ³₄" hole in center of boards
shown. Install rope per instructions
on Page 76.
PA
TTERN
E
E
E