Instructions / Assembly

46
28"
16"
16"
36"
23¹|₄"
³|₄"
3
0"
90"
30"
90"
30"
90"
Items for STEP 5:
(1) Single 4" x 4" Assembly (2B)
(1) Step 4 Assembly
(
1) 2" x 6" x 120" board
(4) #8 x 1¹⁄₄" deck screws
Lay out the Single 4" x 4" Assembly and Step 4
Assembly 90" apart,
elevated on 3" of scrap lumber. Position one 2" x 6" x 120" board
under brackets as shown. Making sure the assembly is square, hold
board tight against bracket and attach with #8 x 1¹₄" deck screws.
Again use the brackets as a drill guide and drill ³₈" holes
completely through the 2" x 6" x 120" board as shown.
Items for STEP 6:
(1) 2" x 6" x 120" boards
(10) #8 x 2¹⁄₂" deck screws
Position second 2" x 6" x 120" board directly
on top of first board and secure with #8 x 2¹₂"
deck screws at dimensions shown.
2
"
x
6
"
x
1
2
0
"
2
"
x 6
"
x 1
2
0
"
D
R
ILL
DRIL
L
90˚
Helpful Hint: If you are standing here looking at the assembly, the A-Frame
Assembly will be on your left side, the single 4" x 4" Assembly will be on your
right side and the brackets will be pointing at each other.
H
H
H
H
E
Flush
SEE PAGE 7 FOR
HOLE PATTERNS