Instructions / Assembly

52
Front Tower Roof Assembly - BRONZE
38¹|₂"
38¹|₂"
38¹|₂"
38¹|₂"
22"
22"
22"
22"
Items for STEP 1:
(
2) 2" x 4" x 22" boards
(2) 2" x 4" x 18¹⁄₂" boards
(2) Roof Caps
(12) #14 x 1¹⁄₄" pan head screws
Items for STEP 2:
(
2) Step 1
A
ssemblies
(4) 5/4" x 6" x 48" boards
(16) #8 x 2¹⁄₂" deck screws
Items for STEP 3:
(4) 5/4" x 6" x 48" boards
(16) #8 x 2¹⁄₂" deck screws
Items for STEP 4:
(1) 2" x 4" x 20¹⁄₂" board
(1) 2" x 4" x 19" board
(16) #8 x 2¹⁄₂" deck screws
On a flat surface position boards together as shown.
Keep boards square while attaching roof cap to
boards with #14 x 1¹⁄₄" pan head screws.
Repeat for second assembly.
Approximate 3¹⁄₂"
overhang each side.
41"
3¹⁄₂"
3¹⁄₂"
H
H
Important do
not exceed 41"
Start at the top and attach boards between top and bottom
boards as shown. Secure with #8 x 2¹⁄₂" deck screws.
Note: If the last board doesn’t fit because the boards
are oversized, remove the bottom board and
reattach.
Repeat for other side.
HH
SEE PAGE 7 FOR
HOLE PATTERNS
90
˚
5/4" x 6" x 48"
5/4" x 6" x 48"
2
"
x
4
"
x
1
8
¹
₂
"
2
"
x
4
"
x
2
2"
2" x 4" x 20¹⁄₂"
2" x 4" x 19"
Hold assemblies 41" apart. Position boards
flush at the top and bottom as shown.
Keep boards square and secure
with #8 x 2¹⁄₂" deck screws.
Repeat for other side.
From the underside of roof assembly, place 2" x4"x 20¹⁄₂ "
board flat against roof assembly centered as shown.
Secure with two #8 x 2 ¹⁄₂ " deck screws per each roof
board.
Place 2" x 4" x 19" board flat against roof assembly
and the 2" x 4" x 20¹⁄₂ " board. Secure with #8 x 2 ¹⁄₂ " deck
screws.
Step 1 Assembly (2)
90˚
SEE PAGE 7 FOR
HOLE PATTERNS
(Approximate overhang)
(Drill Hole Location)
4¹|₄"
3¹|₂"
Flip template over and
slide to 4¹|₄" placement.
H