Instructions / Assembly

56
5/4" x 6" x 24" (7)
Guardrails
Position boards on the inside of
tower flush with the top and bottom
of guardrail boards and equally
spaced as shown. Secure with
#8 x 2¹⁄₂" deck screws.
Caution: Gap between boards
must not exceed 3¹⁄₂"
or a head entrapment
could exist.
E
E
SEE PAGE 7 FOR
HOLE PATTERNS
PATTERN
E
Items for STEP 8:
(7) 5/4" x 6" x 24" boards
(28) #8 x 2¹⁄₂" deck screws
90¹⁄₂"
74¹⁄₂"
54"
2
"
x
4
"
x
2
8
¹
⁄
₂
"
2" x 4" x 21¹⁄₂"
2" x 4" x 13¹⁄₄" (4)
Items for STEP 7:
(1) 2" x 4" x 28¹⁄₂" board
(1) 2" x 4" x 21¹⁄₂" board
(4) 2" x 4" x 13¹⁄₄" boards
(43) #8 x 2¹⁄₂" deck screws
PA
TTERN
B
B
B
B
B
Position boards at dimensions
shown. Secure with #8 x 2¹⁄₂"
deck screws.
Position 2" x 4" x 21¹⁄₂" board
flush with top of deck. Secure
with three #8 x 2¹⁄₂" deck screws
evenly spaced.
SEE PAGE 6 FOR
HOLE PATTERNS
STOP
STOP
If you purchased the optional Adventure Tunnel Kit (PS 8876), it must be installed now.
Follow the building instructions included with the Adventure Tunnel Kit.
Then continue with these instructions.
If you are not installing
the Adventure Tunnel Kit, proceed with these instructions.