Instructions / Assembly

67
³|₄"
31¹|₄"
18"
18"
93"
93"
93"
Items for STEP 5:
(1) Single 4" x 4" Assembly (2B)
(1) Step 4 Assembly
(1) 2" x 6" x 96" board
(
4) #8 x 1¹⁄₄" deck screws
Lay out the Single 4" x 4" Assembly and Step 4
Assembly 93" apart, elevated on 3" of scrap lumber. Position
one 2" x 6" x 96" board under brackets as shown. Making sure
the assembly is square, hold board tight against bracket and
attach with #8 x 1¹₄" deck screws.
Again use the brackets as a drill guide and drill ³₈" holes
completely through the 2" x 6" x 96" board as shown.
Items for STEP 6:
(1) 2" x 6" x 96" board
(8) #8 x 2¹⁄₂" deck screws
Position second 2" x 6" x 96" board directly
on top of first board and secure
with #8 x 2¹₂" deck screws
at dimensions shown.
2
"
x
6
"
x
9
6
"
2" x 6
" x 9
6"
DRIL
L
D
R
ILL
90˚
Helpful Hint: If you are standing here looking at the assembly, the A-Frame
Assembly will be on your left side, the single 4" x 4" Assembly will be on your
right side and the brackets will be pointing at each other.
H
E
H
H
Flush
SEE PAGE 7 FOR
HOLE PATTERNS